Examples of 'cutting length' in a sentence
Meaning of "cutting length"
Cutting length refers to the measurement of the length required to cut a specific object or material. It is commonly used in industries such as manufacturing, construction, and tailoring to ensure precise cutting and accurate sizing of materials
How to use "cutting length" in a sentence
Basic
Advanced
cutting length
Stage cutting length adjustment with comb.
Narrow rabbet stop for maximum cutting length.
The cutting length is adjustable in three stages.
Set the desired cutting length.
The cutting length may deviate depend.
You can change the cutting length at any time.
This makes it possible to rapidly modify the cutting length.
Move the cutting length adjustment knob.
Regulation of the cutting length.
Actual cutting length and cutting length range.
Support for cutting length.
Select a cutting length to suit your desired length of beard.
File or replace the hammer in order to change the cutting length.
Attach the cutting length comb.
The cutting length may deviate depending on the cutting angle.
See also
Mm is a recommended starting value for the cutting length at flex pressure.
Ripping is cutting length wise with the grain.
Sliding the comb attachment will change the cutting length.
Adjust cutting length by moving stopper.
Attachment combs can be used to extend the cutting length range.
In what range of cutting length do you want to cut.
Cutting length adjustable.
Set the adjustable cutting length button to its lowest setting.
Pushing the lever downwards gradually increases the cutting length.
Adjust cutting length with the length adjustment switch.
Pushing the level downward gradually increases the cutting length.
Place a cutting length guide suitable to the desired cutting length.
Hold the device so that the selected cutting length comb attachment.
Setting the cutting length by photocell paper with continuous printing.
Opening for fastening the adjusting system for fixed cutting length.
Pipe cutting length.
The external dimension of the tubular element determines the cutting length.
On which the cutting length and the battery capacity are displayed.
Tighten the wing nuts to secure the top of cut adjustment system of cutting length.
This means the cutting length depends on the thickness of the material.
Fixed cutter structure is suitable for the mass production especially for same cutting length.
Put the adjustable cutting length button onto the lowest setting.
Appreciable differences occur between the theoretically calculated optimum cutting length and the practical value.
The cutting length is shown in the inner side of each cutting guide.
Use this selector to adjust the cutting length with or without the comb attached.
Our cutting length administration tool guarantees you the best prices.
Logs of a big diameter require a long cutting length and thus also a long knife.
The actual cutting length can be less than the specified cutting length.
Follow the same procedure to measure the cutting length for the other extension tube.
The cutting length of the various fodders greatly influences the sorting of the ration.
This makes it possible to change the cutting length from a centralised process control room.
Here the cutting length is approximately the same as when using the smallest comb attachment.
Always use router bits with the shortest cutting length necessary to produce the desired cut.
The controller then carries out the gap adjusting step ready for a subsequent cutting length.
Adjust your desired cutting length using the length adjustment switch.
You'll also be interested in:
Examples of using Cutting
Show more
When cutting a branch that is under ten
Never operate without cutting coolant or paste
Cutting threads to profile girders not required
Examples of using Length
Show more
Tubing length and elevation difference limits
Cut wire liner at the right length
Only the length of the journey differs
