Examples of 'cutting oil' in a sentence
Meaning of "cutting oil"
cutting oil: This phrase refers to a type of oil that is specially designed for use in cutting or shaping metal. It is used in various industrial processes, such as metalworking or machining, to improve the efficiency and effectiveness of cutting tools by reducing friction and heat
How to use "cutting oil" in a sentence
Basic
Advanced
cutting oil
Do not use cutting oil while cutting.
This is equally valid for cutting oil.
The use of cutting oil may cause a fi re.
Bad quality or insufficient thread cutting oil.
Do not use cutting oil on the blade.
Excellent removal of swarf and cutting oil.
All the cutting oil in the machine is.
Use high viscosity coolant or cutting oil.
Only threading cutting oil should be used.
Cutting oil adjustable manual.
This use of cutting oil may cause a fire.
Russia set up a working group on cutting oil production.
Never use the cutting oil as a cutting lubricant.
Method for supplying cutting oil.
Never use cutting oil or apply excessive amount of.
See also
Timer for preheating cutting oil x x.
Confirm cutting oil flow through the die head.
The best result is obtained by using cutting oil or paste.
Prolonged cutting oil service life.
Filled with much mineral oil such as cutting oil.
Replace thread cutting oil when it becomes dirty or contaminated.
Where the scale is exposed to chips and cutting oil.
This prevents the cutting oil from flowing smoothly.
Check the level and quality of the thread cutting oil.
Use cutting oil when cutting soft metals and steel.
Extreme pressure cutting oil.
Thread cutting oil must be used on every hole when tapping.
This solution of triethanolamine can be used as it is to obtain a cutting oil formulation.
Apply plenty of thread cutting oil to the dies during threading.
The glass capillary was then filled with used cutting oil.
With a cutting oil.
This option ensures uncompromising quality and life of the cutting oil.
We recommend cutting oil when cutting most soft metals and steel.
The lubricants that work best are sulphurized cutting oil or lard oil.
A dirty or poor grade cutting oil can result in poor thread quality.
Successful hand and machine threading depends on this quality cutting oil.
Never use cutting oil or apply excessive amount of wax to the blade.
The cooling fluid is preferably a known cutting oil customary in the trade.
Stainless steels with small diameters make great demands on the cutting oil.
The introduction of swarf and cutting oil at the interface is prevented and.
Afterwards the machine was cleaned and filled with the specified cutting oil.
As a control a sample of particle contaminated cutting oil without any addition of polymer was centrifuged.
The capillary was then inspecred visually to see if any used cutting oil reminaed.
Thread cutting oil lubricates and cools the threads during the threading operation.
We recommend lubricating the cutting surface with cutting oil to avoid heat buildup.
Cutting oil ensures longer cutter life and enables the slug to be ejected cleanly.
The cutting lubricants that work best are sulfurized cutting oil or lard oil.
Use cutting oil to lubricate the cut when sawing soft metals and steel.
The problem of the treatment of these spent cutting oil emulsions must therefore be faced.
Lubricant cutting oil Please address any enquiries to.
You'll also be interested in:
Examples of using Cutting
Show more
When cutting a branch that is under ten
Never operate without cutting coolant or paste
Cutting threads to profile girders not required
Examples of using Oil
Show more
Check oil level and fill if needed
Directions for observation with oil immersion
Use olive oil instead of grapeseed oil
