Examples of 'cutting position' in a sentence
Meaning of "cutting position"
Cutting position: Refers to a specific stance or location used in sports like fencing or martial arts for offensive moves
How to use "cutting position" in a sentence
Basic
Advanced
cutting position
Lower mower to its lowest cutting position.
The cutting position of samples can be explained by the following diagram.
Set the power switch to cutting position.
In the cutting position the blade projects out of an opening in the housing.
Use the notch as guide to establish cutting position.
How to define the cutting position creating borders.
The laser will indicate the actual cutting position.
Do not se cutting position too low when mowing very hight or wet grass.
Push shifter handle into sod cutting position.
Rock tool up to normal cutting position after blade has cut through material.
Pull the strings again to rotate the spool into cutting position.
Lower the cutter into cutting position over the pipe.
Pull the lines again to rotate the spool into cutting position.
This is done while in normal cutting position and cutting with top of guide bar.
Make sure that the upper knife is lowered in the cutting position.
See also
Select the proper cutting position for your workpiece by referring to the figure.
Effect of engraving and cutting position.
Adjust the cutting position to the height best suited for your lawn.
This position is the cutting position.
Do not set cutting position too low when mowing very tall or wet grass.
Pull outward on the strings to rotate the spool into the cutting position.
Thus the knives each pass across the cutting position in sequence in a curvilinear motion.
Use thes mounti g holes when wheel motors are in the high cutting position.
When moved to the cutting position of Fig.
For pocket cutting the selector should be kept in the straight cutting position.
Through a cutting position to a second stowed position as shown in FIG.
Pull outward on the line to rotate the spool into the cutting position.
It is in the cutting position captain in the case of the giant Beast attack.
The reverse stroke allows the blade to be returned back to the cutting position.
And a cutting position FIG.
The profiled cutting means is advantageously adapted to reciprocate into and out of a cutting position.
The press members can be swingable and disposed at cutting position with the cutter therebetween.
And a cutting position Figs.
This is helpful when moving the router to align the bit with the cutting position.
Normal Cutting Position Stance used while making bucking and felling cuts.
The retracting means moves the piercing tip from the cutting position to the shielded position.
The cutting position is not accurate top / bottom.
How to position base in the splinter-free cutting position.
He confirmed its cutting position with only 4 seats.
Figure 4 is a top plan view showing the device in the cutting position.
As the cutting position may differ depending on the blade, do a trial cut beforehand.
In addition, a range of a permissible error of a cutting position can be widened.
Further, a final cutting position by the paper pressing plate 7 can be recognized very easily.
High sensitivity eye color marking, make the cutting position more accurately.
The cutting position of the forged material is exhibited in Table 2 below.
Fig . 7 is a front view of the instrument with the cutting guide in cutting position.
Figure 20 shows the saw in the parallel cutting position relative to the guide rail.
Thus, the carcass is stopped precisely at the prescribed sensor position and cutting position.
Thus, the upper and lower end cutting position of the spinous processes are detected.
If you want to cut the grass lower, pass over again with a lower cutting position.
You'll also be interested in:
Examples of using Cutting
Show more
When cutting a branch that is under ten
Never operate without cutting coolant or paste
Cutting threads to profile girders not required
Examples of using Position
Show more
Then position the unit as shown below
Verify the correct position of the gasket
Try to position cages out of direct sunlight
