Examples of 'cutting pressure' in a sentence
Meaning of "cutting pressure"
Cutting pressure: This phrase typically means creating a high-stress situation or environment that requires quick and effective decision-making or action
How to use "cutting pressure" in a sentence
Basic
Advanced
cutting pressure
Motor overload caused by excessive cutting pressure.
Excessive cutting pressure on tubes and profi les.
Motor over load caused by excessive cutting pressure.
Excessive cutting pressure on pipes and section bars.
High cutting performance because of minimal cutting pressure.
Lessen the cutting pressure to safeguard the machine.
Very fast drilling speed and low cutting pressure.
Lower cutting pressure and long tool life.
Allow the weight of the saw to control the cutting pressure.
Reduced cutting pressure thanks to special blade geometry.
Add a Mylar Shim directly below die to increase cutting pressure on material.
Minimal cutting pressure thanks to special blade geometry.
For workpieces of greater strength, the cutting pressure must be higher.
Reduce cutting pressure and guide the machine in a straight line.
Cam mechanism provides smooth, constant cutting pressure for clean cuts.
See also
Increase cutting pressure or decrease cutting speed manually using the eCAL application.
The tool 's own weight provides the most efficient downward cutting pressure.
Maintain steady cutting pressure taking care not to.
When ready to cut, accelerate to full throttle and apply a light cutting pressure.
The generated cutting pressure of the water jet.
Advantageously, the supporting construction comprises moreover a device 7 for adjusting the shearing or cutting pressure.
Do not increase the cutting pressure more than necessary.
Low cutting pressure Low power consumption Optimum chip evacuation Minimum vibration Very good chip formation.
Resultant cutting pressure.
The cutting pressure is regulated by adjusting the radial position of blades 59 on drum 58.
There are 3 pressure adjustment screws, so the applied cutting pressure can be manually adjusted accurately.
Excessive cutting pressure applied cutting disc sticks and stalls in the kerf.
Turn the shoulder screw ( 2 ) to adjust the cutting pressure.
By matching high jaw cutting pressure to high work piece cutting pressure.
Thus, the pressure behind the piston end 38 provides a cutting pressure for the drill bit 64.
Thus the cutting pressure can be applied without reservation on the two cylinders.
This axial displacement serves to impose the cutting pressure on the tools 37, 38.
The abrasion or cutting pressure to which the insulating sheath is subjected is thus reduced.
Caution, too strong cutting pressure may result in pane scratching.
Cutting pressure up to 22 tons/area available for cutting.
Furthermore, the increase of cutting pressure will also shorten the lifetime of the equipment.
The cutting pressure is adjusted by means of the dowel screws 144.
Caution, too strong cutting pressure may result in substrate scratching.
Excessive cutting pressure and/or saw blade not suitable for use.
Consequently, the cutting pressure and depth will be more equal along the axial, longitudinal direction.
Caution, Too high cutting pressure may result in substrate scratching.
You'll also be interested in:
Examples of using Pressure
Show more
No effect on blood pressure or pulse rate was observed
Pressure transmission pipe in the combustion chamber
We were under a lot of pressure because of the family
Examples of using Cutting
Show more
When cutting a branch that is under ten
Never operate without cutting coolant or paste
Cutting threads to profile girders not required
