Examples of 'cutting roller' in a sentence
Meaning of "cutting roller"
Cutting roller: A type of roller used in cutting processes, such as in manufacturing or printing
How to use "cutting roller" in a sentence
Basic
Advanced
cutting roller
Said cutting roller and said transfer roller.
The material is drawn in by the cutting roller and shredded.
The cutting roller is placed into the opposite direction.
Cutting rules are mounted on the cutting roller and rotate therewith.
A cutting roller then cuts the sheets between the pockets.
It is possible to adjust the counter blade B at the cutting roller A free of clearance.
Then treat the cutting roller with preservation spray and grease the bearings.
In case of severe wear, replace cutting roller.
The cutting blades on the cutting roller penetrate the cutting mats in operation.
Winding roller 1 therefore also constitutes a cutting roller.
The second cutting roller 7 can be a drive roller or even an idle roller.
During use, the cutting blades on the cutting roller penetrate the cutting mats.
Naturally the cutting roller 6 can be replaced by several separate longitudinal cutting blades.
The protective film web is conducted in between the cutting roller 6 and the counterroller 7.
They follow the cutting roller helically and have a cusp-shaped profile.
See also
The cutting of the dough sheet is preferably performed using a cutting roller and / or a guillotine.
Right position, The cutting roller pulls in and mulches the material.
Shredding material is not drawn into the shredder - The cutting roller is running in reverse.
Shaving plate, replace cutting roller if heavily worn Shredding material not cut cleanly.
Biodegradable spray oil as protection against corrosion . - the cutting roller and shaving plate are expendable.
Alternatively, the cutting roller can operate directly on upper roller 5.
Otherwise this could damage the cutting roller 12.
The web 2 is cut by a cutting roller 3 into sheets of predetermined length.
A respective cutting blade 19 and 21 is applied on the outer surface of each cutting roller.
Compared with honing steel pipe, the cutting roller has many advantages,.
The cutting roller 31 has a cutting blade, not shown, having a cutting edge at a distal end.
This force FR can correct deflections of the hollow cutting roller 15.
Motor hums but does not start - Cutting roller blocked - Capacitor faulty - Switch off the device.
The length of sheets 4a-4g is determined by the diameter of the cutting roller 16.
For this purpose, there is a cutting roller 77 resting on a support roller 76.
To achieve this, an encoder is used to determine the position of the cutting roller 407.
The material will be fed by the cutting roller ( 12 ) without further assistance.
On said first axis 19, there is therefore mounted a cutting roller 20 with interchangeable blades.
The web 2 is cut by a blade 3 of a cutting roller 17 into sheets of predetermined length.
The receiving-side roller 35 is pressed against the cutting roller 31 by a predetermined pressing force.
You'll also be interested in:
Examples of using Cutting
Show more
When cutting a branch that is under ten
Never operate without cutting coolant or paste
Cutting threads to profile girders not required
Examples of using Roller
Show more
Remove the roller brush halves and re
You can count this high roller in
Turn roller adjustment screw to lower door
