Examples of 'cutting speed' in a sentence
Meaning of "cutting speed"
cutting speed: Cutting speed refers to the rate at which a cutting tool or machine moves through a material during a cutting or machining process. It is an important parameter that affects the efficiency, accuracy, and quality of the cutting operation. Cutting speed is typically measured in linear units per minute, such as feet per minute or meters per minute
How to use "cutting speed" in a sentence
Basic
Advanced
cutting speed
Too fast cutting speed top dross.
Too much pressure slows cutting speed.
Lower the cutting speed in dry cutting.
This is unacceptable in view of its cutting speed.
The correct cutting speed is accompanied by a sputtering.
Reduce the load to attain optimum cutting speed.
Cutting speed too fast or too slow.
By this means a uniform cutting speed is achieved.
The cutting speed is at least equivalent or higher.
This optimises the cutting speed in all conditions.
Cutting speed must be as uniform as possible.
Higher knife pressures need lower cutting speed.
The cutting speed acquired is very high.
High heat generation limits the cutting speed.
Increase cutting speed grey cast iron.
See also
Outstanding balance between lifetime and cutting speed.
Increased cutting speed compared to earlier models.
The speed of movement defines the cutting speed.
Unmatched cutting speed and precision.
We continue on our way to cutting speed.
The cutting speed is too rapid.
The speed of motion defines the cutting speed.
Incorrect cutting speed in relation to the piece to cut.
Allow the saw blade to reach full cutting speed.
Higher cutting speed than necessary.
Blade noise can eliminated by adjusting the cutting speed.
Adjust the cutting speed as indicated in this manual.
Smaller letters can be obtained by reducing the cutting speed.
Always adapt cutting speed to the respective working.
This means less noise and a constant cutting speed.
The cutting speed is related to the cutting material.
With high chip removal rate high cutting speed.
The effect of cutting speed to a quality of wooden surface.
Features a belt driven and has four cutting speed.
Cutting speed not right for the workpiece being cut.
Effective or true cutting speed.
The cutting speed of the arm is controlled by a throttle valve.
Thus its cutting ability and cutting speed are improved.
Cutting speed travel speed.
This ensures a uniform cutting speed even when under strain.
Cutting speed will be automatically adapted to suit ground conditions.
Optional cutting speed.
The cutting speed and the feed rate are calculated automatically.
Recommended cutting speed.
Optimum cutting speed prevents degradation of pipe material through overheating.
Precise cuts thanks to fast cutting speed and lower vibration.
Cutting speed and time could be adjusted according to production needs.
I am gonna be cutting speed.
Faster cutting speed over similar products on the market today.
Fully squeeze the switch trigger and maintain cutting speed.
You'll also be interested in:
Examples of using Cutting
Show more
When cutting a branch that is under ten
Never operate without cutting coolant or paste
Cutting threads to profile girders not required
Examples of using Speed
Show more
The speed of the vacuum source shall be
I must have hit speed dial by mistake
Zoom speed is determined by the amount of rotation
