Examples of 'cycle count' in a sentence
Meaning of "cycle count"
Cycle count is a method used in inventory management to count a small subset of inventory items continuously
How to use "cycle count" in a sentence
Basic
Advanced
cycle count
Cycle count can not be reset or changed.
Easy way to measure cycle count.
A cycle count maintained in the logic unit is increased by one.
Monthly inventory cycle count.
Cycle count improvements.
Expendable cycle count.
The cycle count and time relationships between the two devices are stored in a matrix.
Disposal backlog Expendable cycle count.
Mk refers to a cycle count associated with a device other than Di and other than Dj.
A new Matrix Histogram plot is used to visualize the results of the Rainflow cycle count.
The Cycle Count number shows you how many charge cycles a battery has been through.
Fretting, typically from high cycle count dynamic loads.
The battery cycle count is listed under the Battery Information section.
At this stage, the algorithm increments a pacer cycle count variable.
All cycle count offset matrices are in the form of a skew-symmetric matrix.
See also
Table 6 illustrates the construction of a direct cycle count offset matrix.
Cycle count interval, when and how many items in a classification are considered complete?
Hence, the diagonal of direct cycle count offset matrices is always equal to zero.
For optimal performance, replace your battery before you reach the maximum cycle count.
For simulation purposes, instructions for cycle count and measurement parameters are added to the code.
Each correlation coefficient produced during the cross-correlation is associated with a cycle count for each device.
Additionally, a cycle count on the entire warehouse took just three hours versus two days.
The process then returns to step 500 in which the cycle count is incremented by one.
Tellingly, cycle count motivation is evolving from concern about compliance to WMS optimisation.
In an accelerated life test, a separator manufactured in this way reached a cycle count of 150 cycles.
FIGURE 14 presents a set of cycle count packets for use in the presently disclosed process.
Apple support, Mac notebooks, Determining battery cycle count.
Thus, the cycle count offset matrix can be of the skew-symmetric matrix type.
The frequency and amplitude variations and associated cycle count are tracked by the device firmware 136.
Mij refers to a cycle count offset ( or difference ) associated with a device pair, Dij.
The data alignment algorithm 180 disclosed above determines the cycle count offset between any two devices.
To exit the Cycle Count Check Mode, press the “ Signal ” key again.
Press the Dec or Inc key to DECREASE or INCREASE the cycle count between 1 to 5.
A cycle count is incremented by one in step 117.
At this point, the controller increments its Cycle Count Value 338.
Reduced cycle count time and associated labour costs by over 80 %.
Comparing the duty cycle count value to a local period value with a local period comparator ( 424 ) ;.
Comparing the duty cycle count value to the duty cycle value with a duty cycle comparator ( 110 ) ;.
You'll also be interested in:
Examples of using Cycle
Show more
The cycle can be delayed up to nine hours
Press repeatedly to cycle through menu options
Cycle through different information display modes
Examples of using Count
Show more
If you do not count robbing people blind
Count yourself lucky we did not lock you up
Your white blood count is extremely low
