Examples of 'cycle signal' in a sentence
Meaning of "cycle signal"
cycle signal: a traffic light or indicator used to control the flow of vehicles and pedestrians at an intersection
How to use "cycle signal" in a sentence
Basic
Advanced
cycle signal
Dishwasher beeping end of cycle signal.
A duty cycle signal from the computer controls this solenoid to vary air flow.
Select for an end of cycle signal.
End of cycle signal will continue to sound until CANCEL is touched.
Use the SIGNAL button to change the volume of the end of cycle signal.
Select Off if neither an end of cycle signal or automatic extra rinse is desired.
Use the Cycle Signal especially when drying fabrics like polyester knits and permanent press.
A signal will sound periodically if the End of Cycle Signal is selected.
Touch and hold Cycle Signal for about one second to turn sounds on or off.
When the cycle has finished, the end of cycle signal will sound if set.
Press the Cycle Signal knob to start the dryer.
Data are transferred on the Tree-Bus four bytes in parallel on each clock cycle signal.
End of cycle signal continues to sound until OVEN CANCEL pad is pushed.
Select End of Cycle signal optional.
The Cycle Signal produces an audible sound when the drying cycle is finished.
See also
The compressor controller supplies a variable duty cycle signal to the solenoid valve 56 as previously described.
The Cycle Signal produces an audible sound when the wash cycle is finished.
Signal - Press the signal pad to increase or decrease the end of cycle signal volume.
The End of Cycle signal is part of the Start button and is selectable.
By comparison, Figure 3 illustrates the variable duty cycle signal wherein the frequency is also varied.
Use the End Cycle Signal to remind you to remove the dried laundry.
On some models, the volume of the End of Cycle signal.
Push and hold the Cycle Signal knob to begin the cycle.
Cycle Signal - A tone will sound at the end of the cycle.
To be alerted when this cycle is complete, select the End of Cycle Signal.
The End of Cycle Signal produces an audible sound when the drying cycle is finished.
If desired, select the Cycle Signal button.
The End of Cycle Signal will sound once the cycle is completed.
If desired, you may turn the Cycle Signal OFF.
Turn the Cycle Signal knob to select the desired setting Yes or No.
After 3 ½ hours oven turns off and an end of cycle signal sounds.
Preferably, the duty cycle signal is defined by a binary bit pattern.
The left column corresponds to the decoded cycle signal 108 of Figure 1.
A low duty cycle signal reduces air passing through the solenoid for “ rich ” operation.
A relay according to claim 13, wherein said duty cycle signal can be selectively changed.
The End of Cycle signal sounds when a cycle is complete, the.
The decision logic module 166 ( Figure 9 ) determines the duty cycle of the variable duty cycle signal.
On some models, the Cycle Signal option is on when the icon is lit.
When the Cycle Signal is selected, a beep will be heard periodically.
On select models, the End of Cycle Signal can be turned down or Off.
NOTE, If the cycle signal is turned o, the damp signal will still sound.
Transmission of the start of cycle signal to a temporary storage device ( 12 ) ;.
A 50 % duty cycle signal is employed to control the switches.
On some models, press Cycle Signal to operate the Control Lock feature.
This duty cycle signal is provided to inverting input pin 4 of comparator 126.
At that time a complete cycle signal will be generated by the comparator 118.
A high duty cycle signal increases control vacuum for “ lean ” operation . 811 Vehicle Speed Sensor.
This generates the duty cycle signal provided to the inverting input pin 4 of comparator 126.
Means ( 128 ) for generating a minimum duty cycle signal having a magnitude representative of the preselected acceptable range ;.
You'll also be interested in:
Examples of using Signal
Show more
Give me a signal when you want me to start
You have to use one signal at a time
Signal strength indicating connection between units
Examples of using Cycle
Show more
The cycle can be delayed up to nine hours
Press repeatedly to cycle through menu options
Cycle through different information display modes
