Examples of 'cylinder bores' in a sentence
Meaning of "cylinder bores"
Cylinder bores: The hollow openings within an engine block where pistons move up and down during the engine's operation
How to use "cylinder bores" in a sentence
Basic
Advanced
cylinder bores
The diameter of the cylinder bores thereof are different however.
A large number of plungers are slidably fitted respectively in the cylinder bores.
It utilizes the cylinder bores and engine deck to provide accurate surfaces.
The other holes are arranged properly around the cylinder bores.
Areas around the cylinder bores Hc are sealed in accordance with the present invention.
The auxiliary beads can sufficiently seal around the cylinder bores.
Scratching of the cylinder bores if it isn't deep.
A large number of motor plungers are slidably fitted respectively in the motor cylinder bores.
However, reduced distance between the cylinder bores causes the following problems.
A large number of pump plungers are slidably fitted respectively in the pump cylinder bores.
In an old engine, the distances between the cylinder bores are spaced apart relatively widely.
Pull the recoil starter a couple times to lubricate the piston rings and cylinder bores.
Thus, the cylinder bores Hc are substantially completely sealed.
Some engine blocks with siamesed cylinders also provide minimal cooling between the cylinder bores.
It 's comprised of the cylinder bores where the pistons slide up & down.
See also
Accordingly, the gasket can completely seal all around the cylinder bores.
Namely, all the cylinder bores Hc are located inside the imaginary lines A14.
Thus, combustion gas does not leak from the cylinder bores Hc.
Cylinder bores were coated with Moto Guzzi 's patented " Nikasil.
Relatively equally surface pressure is formed around all the cylinder bores Hc, Hc1.
Four cylinder bores 112 are shown in series on their respective sides of the joint component 10.
The OHV pushrod engine has four valves per cylinder, and nickel-ceramic coated cylinder bores.
This allows the distance between the cylinder bores 15 to be reduced.
This is highly likely to create cracks ( hot tear ) between the cylinder bores.
Specifically, the cylinder block 6 includes a pair of cylinder bores 10, 10 running mutually parallel to each other.
Cooling liquid or water circulates through the space 15 for cooling the cylinder bores 11.
The crankcase 44 closes each another end of the cylinder bores 50 and journals a crankshaft 56 therein.
The lower plate 10 further includes an intermediate área 10c between the adjacent cylinder bores Hc.
On the mechanical side, the B18 engine might as well have cylinder bores lined with diamonds.
Figure 1 shows a cylinder block 10 of an internal combustion engine with three parallel cylinder bores 12.
The shim A14 provides high surface pressure around the cylinder bores Hc.
A first hydraulic cylinder pin 56 is disposable in the cylinder bores 54.
Thus, the second valve holes 40 are smaller in diameter than the motor cylinder bores 39.
You'll also be interested in:
Examples of using Cylinder
Show more
Outside cylinder condenser no contact with water
Clean the filter cylinder every week
Cylinder locks with custom locking system
Examples of using Bores
Show more
Ran two large bores of saline en route
Bores of different diameters with a single tool
And a machine bores a hole clear through
