Examples of 'cylinder rod' in a sentence
Meaning of "cylinder rod"
A cylinder rod is a type of cylindrical object, typically made of metal, that is used in various applications such as machinery, hydraulic systems, and construction equipment
How to use "cylinder rod" in a sentence
Basic
Advanced
cylinder rod
This will protect the cylinder rod surfaces from corrosion.
Position sensing hydraulic cylinders eliminate the need for a hollow cylinder rod.
Attach the cylinder rod ends to the anchor points of the unit.
A piston is mounted within the tubular cylinder housing is secured to the cylinder rod.
Retraction of the cylinder rod causes the jaws of the grab to open.
This is accomplished by extending or withdrawing hydraulic cylinder rod 4.
Align the holes in the cylinder rod end with the holes in the wedge.
Cylinder rod end & lower left hand pulley bracket.
Insert a screwdriver into the bolt hole in the cylinder rod and slowly rotate as needed.
The cylinder rod seal is made of self-lubricating material.
Unfolding and folding the support is done by extending or retracting the hydraulic cylinder rod 4.
Fav Arrow showing movement of the cylinder rod in the direction of elongated component gripping.
Start of expansion cycle, Upstroke of cylinder rod.
Accordingly, the cylinder rod is not reciprocated within the master cylinder.
A guide engaging member 6 is provide at the extreme end of the cylinder rod 5a.
See also
Push the reel back until cylinder rod ( C ) lines up with the aft holes in bracket D.
Similarly, the hooks 12 can also be made as a part of the hydraulic cylinder rod.
The cylinder rod 34b exerts its driving thrust upwardly.
It will be apparent that the tubular structure of cylinder rod 102 is quite sturdy.
Three strokes of the cylinder rod are required to rotate 60 ° between each position.
Projecting from the front cylinder 90 axially is a forward cylinder rod 96.
Figure 3 shows the cylinder rod 70 in the retracted position with the racks pulled down.
The cylinder 26 is attached so that a cylinder rod 27 faces downward.
A threaded cylinder rod 45 threads into top plate 8e of carousel 1.
The pressing plate 8 is secured to a cylinder rod 7 of a cylinder ( not shown ).
Cylinder rod spring 2 and 22 resting ring for positioning the piston 8.
The cylinder 21 is attached so that a cylinder rod 22 moves in the vertical direction.
This causes cylinder rod 559 to move to an extended position ( shown in dashed lines ).
A coil support pin 89 is fixedly mounted on the distal end of a cylinder rod of a cylinder 100.
The forward cylinder rod 96 connects with a vertical brake support plate 98.
As a result, the position of the cylinder rod pushing the socket 192 is also determined.
The cylinder rod eye 90 is pivotally attached to a mold operating arm 92 by a mold clevis pin 94.
You'll also be interested in:
Examples of using Rod
Show more
A guide rod is in place to ensure correct positioning
Do not touch the rod during operation
My rod and my staff shall discomfit thee
Examples of using Cylinder
Show more
Outside cylinder condenser no contact with water
Clean the filter cylinder every week
Cylinder locks with custom locking system
