Examples of 'cylinder sleeve' in a sentence
Meaning of "cylinder sleeve"
cylinder sleeve: A component used in engines, a cylinder sleeve is a cylindrical metal tube inserted into an engine block to protect the cylinder from wear and tear or to restore a worn-out cylinder to its proper functioning
How to use "cylinder sleeve" in a sentence
Basic
Advanced
cylinder sleeve
Replace piston and cylinder sleeve assemblies.
Cylinder sleeve not seated correctly.
Compressor head and cylinder sleeve are very hot.
Cylinder sleeve for printing presses.
Never carry the mounted instrument by the cylinder sleeve or the valve block.
Cylinder sleeve material.
Such structure results in many difficulties in terms of the mounting of the cylinder sleeve.
The engine cylinder sleeve is cast iron for a longer service life.
Figure 2 - is the perspective view of a cylinder sleeve not having a groove on it.
Cylinder sleeve 실린더 슬리브.
The functions of the cylinder sleeve are as follows,.
Cylinder sleeve not seated correctly on bottom bumper Disassemble to correct.
Accordingly, it is possible to provide a cylinder body, on which a cylinder sleeve is provided firmly.
Thus, when two cylinder sleeves II of this type cooperates, a cylinder sleeve group is obtained.
Preferably, the cylinder of the mechanical equipment comprising the cylinder sleeve group above mentioned.
See also
The engine used a one-piece cylinder sleeve construction unique from any other B-series engine.
Mounting the end plate and the first rotogravure cylinder sleeve onto the shaft ;.
In other words, the cylinder sleeve 10 is slid until it strikes against the ring.
Thus, the adhesion between the cylinder barrel assembly and the cylinder sleeve assembly is enhanced.
An end of the cylinder sleeve 11 is exposed to the mating surface 15.
A membrane ring 7 abuts against the cylinder sleeve 3.
Figure 5 - is the side view of a cylinder sleeve having grooves on it.
Furthermore, the compressor ( 1 ) can also be operated efficiently at different capacities than the cylinder sleeve ( 9 ).
Figure 4 - is the perspective view of a cylinder sleeve having grooves on it.
These projections 12 are formed simultaneously with casting of the cylinder sleeve assembly 3.
Cylinder wall 92 extends axially for a total length of cylinder sleeve portion 94 and outer cylinder portion 116.
Fig.3 is a broken plane view of an essential portion of a cylinder sleeve assembly ;.
Fig.7 is a plan view of a sand mold for casting a cylinder sleeve assembly ;.
This defines a cylinder barrel assembly shaping cavity 17 between the cylinder sleeve assembly 3 and the core 16.
The front side 14 of the ring thus serves as a stop surface for the cylinder sleeve 10.
You'll also be interested in:
Examples of using Sleeve
Show more
Clean glass sleeve with a damp cloth
Sleeve with integrated load distribution ring
Roll up the sleeve on your left arm
Examples of using Cylinder
Show more
Outside cylinder condenser no contact with water
Clean the filter cylinder every week
Cylinder locks with custom locking system
