Examples of 'damaged replace' in a sentence
Meaning of "damaged replace"
damaged replace: This phrase suggests the need to remove or substitute something that is broken, spoiled, or no longer functional with a new or repaired version
How to use "damaged replace" in a sentence
Basic
Advanced
damaged replace
Mains cable damaged replace cable.
Abnormal noise coming from the RollerDrive Motor or gearbox is damaged Replace the RollerDrive.
If the fi lter is damaged replace it with a new one.
Abnormal noise coming out of the RollerDrive Motor or gearbox is damaged Replace the RollerDrive.
If it is damaged replace with a new one.
Insulation of probe rod damaged Replace probe.
If the hose is damaged replace it with the correct manufacturers part.
Recovery hose is kinked or damaged replace the hose.
Filter damaged replace it filter badly instelled make sure is correctly.
Teeth worn or damaged replace blade.
Staples are not completely closed Jaw fall block is bent or damaged Replace block.
Power electronic regulator damaged replace power electronic regulator.
Excessive sparking of the brushes Brushes worn or damaged Replace.
If the blade is cracked or damaged replace it with a new one.
If being damaged replace an individual container by a new one and discard the old one.
See also
Grinding wheel is damaged Replace the wheel.
Turn power on Use another socket Inspect cable, replace if damaged Replace fuse.
Connector seal may be damaged replace seal or accessory part.
Will not turn in one direction Servo gears damaged Replace servo.
If either element is damaged replace both of them they are not sold individually.
The motor jammed causing bearing damaged Replace motor.
Boat battery is damaged Replace boat battery and follow battery instructions.
Model is very noisy Propeller was damaged Replace the propeller.
B If the bearings are damaged replace them or if necessary contact an authorised service centre.
Does not heat up Heating mantle is damaged Replace heating mantle.
Piston damaged Replace piston and seal.
Ferrules installed incorrectly or damaged Replace compression ferrules.
Firing pin damaged Replace damaged parts.
Check extension cords before each use, if damaged replace immediately.
Motor is damaged Replace the motor.
Pressure control valve ball / ball seat damaged Replace.
If the gasket is worn or damaged replace it with a new one same type.
Transient voltage surge suppressor ( TVSS ) damaged Replace TVSS.
Power cord is damaged Replace power cord.
Will not turn one direction Servo gears damaged Replace or repair servo.
Controller damaged Replace controller and use a TVSS.
Battery is old, worn out or damaged Replace battery.
Power cord is damaged Replace drive assembly.
Inspect the lid o-ring ; if damaged replace.
Check valve is damaged Replace the check valve.
Spark plugs dirty with oil, wet, jumpered or damaged Replace the spark plugs 3.
Piston stop is damaged Replace piston stop.
Audio connection cable is damaged Replace the cable.
Backing pad damaged Replace backing pad.
Trigger valve o-ring worn or damaged Replace valve using.
DC motor is damaged Replace drive assembly.
Servo gears or motor damaged Replace or repair servo.
Flight battery is old or damaged Replace the fl ight battery.
Drill bit tip worn or damaged Replace drill bit.
The door seal may be damaged Replace door seal.
You'll also be interested in:
Examples of using Damaged
Show more
Do not use damaged input or welding cables
Make sure none of the cables are damaged
Damaged or worn blades should be replaced immediately
Examples of using Replace
Show more
Replace the leads in the rear upright
Do not attempt to replace the plug yourself
Replace the lid before recommencing blending
