Examples of 'damper plate' in a sentence
Meaning of "damper plate"
damper plate: a mechanical component used to reduce vibrations, noise, or oscillations in a system or machinery
How to use "damper plate" in a sentence
Basic
Advanced
damper plate
Slide damper plate back and lift up.
Sounds like you have got the wrong damper plate.
Damper plate removed or fastened in open position.
Remove screw attaching damper plate to top of microwave oven exterior.
The shock absorbers are thus somehow interconnected via the damper plate.
Secure damper plate with screw.
Pick up blower motor and rotate so tabs align with damper plate bracket.
Keep damper plate and screws together and set aside.
The regulation device may have a construction different from the damper plate presented herein.
Keep damper plate and screw together and set aside.
The flange portion of the damper plate is press-formed.
The damper plate may carry the guide ring or vice versa.
The air register is provided with an airflow regulating device, such as a damper plate 5.
Secure damper plate assembly by placing nuts on bolts and tightening with socket or wrench.
To this end, the spacer bars extend through apertures in a damper plate 4 of the damper.
See also
Remove damper plate in the chimney or secure in OPEN position.
Also, the pen may be provided with a combination damper plate and ballast weight, if needed.
Preferably, the damper plate is of sufficient mass to also serve as a ballast weight.
The pads 9 overlie the edge of the damper plate 3.
This damper plate 60 has an axially oriented portion at its inner and outer periphery.
If necessary, a further ballast weight 26 may be suspended from the damper plate.
Insert damper plate assembly into insert sleeve and carefully align with 8 " house duct.
The guide ring 40 surrounds at least the greater part of the damper plate 60.
The damper plate turns about a shaft 6.
This is possible because the ring 129 extends parallel to the damper plate 18.
Damper plate ( B ) fully open towards final rinse zone.
The buoy may be stabilized and weighted with a damper plate 22 and tom weight 26.
A disk-shaped damper plate 22 is suspended from the bottom of the spar buoy by multiple cables 24.
It will be appreciated that the ring 140 and the damper plate 118 are substantially unchanged.
In particular, the locating element may consist of the damper plate 50 of FIG . 3.
You'll also be interested in:
Examples of using Plate
Show more
Put the upper plate on the stove
Face plate in position for shredding paper
Do not submerge hot plate or burners in water
Examples of using Damper
Show more
Close fireplace damper when not in use
Damper assembly for wall or roof venting
Check that the damper opens freely
