Examples of 'db' in a sentence
Meaning of "db"
DB - could refer to 'database' in the context of computing or 'decibel' in the context of sound measurement. It is often used as an abbreviation
Show more definitions
- Initialism of dead body.
- Initialism of defensive back.
- Initialism of database.
- Initialism of depot brigade.
How to use "db" in a sentence
Basic
Advanced
db
Merge another db back to the main one.
Place the function switch in the dB position.
The value to which dB is attached indicates a gain value.
Its level depends of the selected dB scale.
The zero dB line is determined by the calibration factor.
Use the scale marked dB to read decibels.
The gain at each specified azimuth is provided in dB.
I db three months compared to the same three months.
The external rolling noise measured value dB.
Values with dB are gain values.
The date of the last charge carried out by dB.
Antenna attenuation can be given either as dB values or as relative fields.
The actual voltage attenuation of the amplifier is shown in dB.
Differences in suppression effect values are expressed in dB in the majority of studies.
The displayed value indicates the relative volume level in dB.
See also
Methodological procedures and db characterization.
The volume level is indicated in decibels dB.
Each time the meter enters the dB mode it stores the.
The number on the bottom indicates the relative level in dB.
Indicates the number of dB that the gain is reduced by the limiting function.
Use the buttons to select the desired dB range.
This meter shows the number of dB that the gain is reduced during compression.
The noise levels are rated in dB decibels.
He founded dB Soundworks to sell and promote his music.
Noise levels are measured in decibels dB.
This mode is indicated by the dB annunciator in the LCD panel.
Sound levels are measured in decibels dB.
Db Records about the effective control of the output materials.
The external rolling noise class and measured value dB.
Parameter Max dB defines top spectrum value shown on the diagram.
This meter shows the true peak gain reduction in dB.
DB The unit of measurement for electrical levels is the deci Bel dB.
Sound reduction of the engine in dB.
DBSTEP Set the dB step size to dB.
Total average noise reduction dB.
A volume of up to 40 dB is achieved if the additional amplification is switched on.
Blue button toggles upper readout between frequency and dBm dB.
At 0 dB the mixer is at its rated maximum output.
Value to be added to the higher of the two noise levels dB or dBA.
Set to 0 dB in case of distorted audio input signals.
The noise figure is simply the noise factor expressed in decibels dB.
Less than 1 dB with any control combination.
The unit of the sound energy density level is the decibel dB.
Power measurement in dBm and mW, loss display in dB.
This sound pressure level can be measured and is commonly expressed in decibels dB.
In case of displays above 0 dB the channel is overloaded.
Impedance adjustment for the actual atmospheric conditions at the receiver point dB.
The recording level is 0 dB when the power is turned on.
The acoustic impedance adjustment is usually less than a few tenths of one dB.
Recording level is set to 0 dB when the power is turned on.
