Examples of 'dead volume' in a sentence
Meaning of "dead volume"
Refers to the space or portion within a container or system that does not contribute to the intended purpose or function
How to use "dead volume" in a sentence
Basic
Advanced
dead volume
The conjugates are eluted in the dead volume.
Calculation of dead volume in a piston compressor.
These evolutions suggest the existence of a dead volume.
This valve has significant dead volume of several microliters.
Column adapters were used to minimize the dead volume.
This restricts the dead volume inside the spray orifice.
This empty volume is usually called dead volume.
The dead volume is preferably formed behind the hermetic passage.
Fluid pump without dead volume.
This small dead volume optimizes the energy per unit volume.
Very small dead volume.
Every pressure swing adsorption system contains dead volume.
It should be understood that this dead volume is not necessarily zero.
It is preferred that the fluid connector has a low dead volume.
Discard the dead volume.
See also
The sampling point as possible in order to keep the dead volume.
A technique for determining the dead volume is disclosed below.
A dead volume may provide a habitat in which disease or microorganisms may grow.
Accessories without dead volume.
Extension catheter dead volume can be reduced by reducing its length and diameter.
Servicing assisting system for shock struts with negative dead volume.
This can also reduce the dead volume which does not contribute to compression of refrigerant.
Between applications saline flowed to clear any dead volume in the system.
A dead volume in the injector cavity requires time to fill and achieve the required pressure.
The captive insert also reduces the dead volume in the actuator.
This embodiment of the regulator facilitates the design and production of the dead volume.
Such a design involving introducing an evacuated dead volume therefore meets this requirement well.
None of the prior art utilizes a gas to displace the dead volume.
Higher lengths would lead to significant dead volume without significantly improving the separation result.
The size of the application zone significantly affects sample dead volume.
Such again guarantees a minimum dead volume between parts and the minimum space for air entrapment.
The invention features an electrode strip with a reduced sample dead volume.
The TTB serves to measure the dead volume of the column.
The object of the invention is thus to reduce to a strict minimum this dead volume.
The effect achieved by this configuration is a smaller dead volume and greater mechanical stability.
Still another object of the invention is to provide sprayer with a lower dead volume.
The dead volume of the cylinder in first approximation simulates that of the Stirling system.
Such valve has no moving parts or vibrations and a low dead volume.
The dead volume and compartment S of distributor VI are therefore put to air.
This arrangement makes it possible to limit the dead volume inside the dome.
The dead volume V then commences to fill.
The volume in which the spring is housed represents dead volume in the system.
The dead volume retention time was 2 minutes.
Conventional piston arrangements have a period of delay where the dead volume is filled.
In this way, the dead volume is minimized.
The probe immersion time is thus conditioned by the filling rate of the dead volume.
In this way, the dead volume of the system is minimised.
This contributes to the accuracy of the amount of fluid delivered and avoids dead volume.
Thus, the dead volume of heat transfer fluid is minimized.
At the same time this configuration maintains the accumulator dead volume at a minimum level.
