Examples of 'debonding' in a sentence
Meaning of "debonding"
Debonding is a term used in chemistry or engineering to describe the process of breaking adhesive bonds
Show more definitions
- present participle of debond
How to use "debonding" in a sentence
Basic
Advanced
debonding
Use proper debonding techniques to avoid enamel damage.
No cementation and no risk of inflammation or debonding.
The debonding procedure is relatively straightforward.
The system also comprises a fluid debonding agent.
Particle debonding is studied thanks to mesoscopic numerical model.
These dissipative mechanisms appear at three levels during debonding.
Suitable debonding agents include quaternary ammonium compounds.
Are effective chemical debonding agents.
The debonding agents act as lubricants or friction reducers.
Thus there is a need for improvements to debonding various surfaces.
Mechanical debonding typically enhances absorbency but reduces strength.
Swelling may not always result in adhesive failure or debonding.
The debonding agent typically is added to cellulose fiber stock.
This force is not sufficient to prevent debonding of the deposit.
These chemical debonding agents include quaternary ammonium salts.
See also
The challenges associated with adhesive debonding are well recognized.
Suitable cationic debonding agents include quaternary ammonium salts.
Another example of an adhesive deactivating agent is a debonding agent of fugitive silicones.
This results in debonding of the coating from the diamond.
Overlap areas were inspected visually for debonding before the test.
The work of debonding during the traction step is evaluated.
It is within the scope of the invention to use a cationic debonding agent.
Debonding provides more free fiber length in the nonwoven sheet.
This trapped flux causes outgassing or debonding during cathode operation.
Debonding propagation is then studied by using a classic mixed mode fracture criterion.
They highlight the importance of the debonding phenomenon in the damage scenario.
Debonding of fibers can also be accomplished chemically by adding chemical debonding agents.
The intermediate layer acts as a debonding layer between outer layers of fibers.
A debonding agent may also preferably be added to the aqueous suspension of cellulose fibers.
No hydrolytic debonding.
A container in which the debonding agent is stored prior to administration to the article.
A study was conducted in static and cyclic fatigue loading with various debonding lengths.
There is no debonding between the dispersed phase and the matrix phase.
Our objective was to investigate the effectiveness of debonding ceramic brackets with a diode laser.
Chemical debonding agents are well known in the manufacture of paper products and nonwoven materials.
Further there is no need for a chemical debonding agent in the method of this invention.
These debonding agents do reduce both dry tensile strength and wet tensile strength.
In a shorter or longer term this could eventually give rise to a debonding of the sheet.
The debonding agent is sprayed on the sheet prior to passing the sheet through a drier.
Finite element method was also used to identify how debonding efforts act on enamel surface.
This debonding effect becomes more pronounced as the level of mineral oil applied is increased.
The slow degradation of the filler surface causes debonding from the resin matrix.
The debonding surface energy is approximately one third lower than the cohesive fracture energy.
Flexibilized epoxy mastic intumescent coatings have been suggested to avoid debonding with temperature cycling.
The debonding reduces the effectiveness of the FRP reinforcing.
The background portion of this document describes certain disadvantages of using cationic debonding agents.
Again, a debonding agent may not be required.
The creping energy can therefore debulk a portion of the web along the debonding layer.
However, no debonding of the film was observed.
The present invention provides an elegant method for curing and debonding of the same adhesive.
