Examples of 'decarburization' in a sentence
Meaning of "decarburization"
Decarburization is a metallurgical process in which the carbon content of a material is reduced, typically by heating in a low-carbon environment
Show more definitions
- The act, process, or result of decarburizing.
How to use "decarburization" in a sentence
Basic
Advanced
decarburization
This results in a somewhat longer decarburization time.
Preventing decarburization by firmly binding carbon.
Surface condition and surface decarburization.
Protect the tool against decarburization and oxidation during hardening.
Introduction of high strength bolts heat treatment process of decarburization.
Protect the tool against decarburization and oxidation during austenitizing.
The workpieces hardened underwent neither carburization nor decarburization.
Heat generated by decarburization of the pig iron melts the scrap.
The gas necessary for decarburization.
Partial decarburization depth.
Permissible depth of decarburization.
In China the decarburization technique is used to produce steel.
The samples were subjected to heat treatment of decarburization annealing and ageing.
Decarburization occurs when Carbon in the metal reacts with gasses present in the atmosphere.
Vacuum oxygen decarburization.
See also
The cold rolling is followed by a line treatment of primary recrystallization and decarburization.
This leads to superficial decarburization and a loss of strength in the surface.
It increases susceptibility to decarburization.
Protect the tool against decarburization and oxidation during the hardening process.
Then the cold rolled steel sheet undergoes the decarburization annealing.
Decarburization Kinetics The rate of decarburization is given by the following relationship.
Testing for decarburization.
The decarburization was promoted and the ultimate C content was remarkably lowered.
This is advantageous to prevent decarburization and oxidation of the working material.
Short times with high Dew Points favored decarburization.
The ideal anneal would involve complete decarburization in this temperature range without any oxidation.
Such decarburization requires impractically long time and, hence, is uneconomical.
The tool should be protected against decarburization and oxidation during hardening.
It has low machinability and grindability, with a medium resistance to decarburization.
Inspection of decarburization.
In addition, boiling phenomenon tends to take place during the decarburization.
Additional injection of oxygen for melt decarburization can be accomplished by any means.
Furthermore, manganese disturbs this refining by limiting the possibility of decarburization.
This type of oxygen blowing advantageously promotes decarburization but also elevates the molten steel temperature.
Namely, decarburization proceeds by the mixed gas and the carbon potential is decreased.
Malleableizing by decarburization.
As a result, decarburization time is decreased substantially.
The objective is to find conditions necessary to maximize decarburization rates while avoiding oxidation.
Process for the decarburization of chromium-containing pig iron.
Further, it is effective for preventing decarburization of ferrite.
The final decarburization and nitriding treatments can be performed in various alternative ways, such as,.
Then, it was subjected to decarburization by blowing oxygen gas.
In addition, these injections of argon considerably speed up the decarburization kinetics.
The treatment is a decarburization treatment applied to steel ;.
The hydrogen / carbon reaction can cause surface decarburization of steel.
Total decarburization ( partial and complete ).
They lead to non-representative samples because of decarburization during transfer.
This decarburization is obtained by blowing in oxygen by means of an emerged sic! lance 42.
At these hot forging temperatures, substantial scale and decarburization of the steel occurs.
Decarburization of surfaces ; avoid.
