Examples of 'deformation process' in a sentence
Meaning of "deformation process"
deformation process: Deformation process is a term used in materials science and engineering to describe the change in shape or size of a material due to applied forces or temperature changes. It involves altering the structure of a material without necessarily changing its chemical composition
How to use "deformation process" in a sentence
Basic
Advanced
deformation process
The deformation process is isothermal and adiabatic.
The continuity of the local deformation process is checked.
Reinforcements in this sense instead are added to a component after a deformation process.
Deformation process related to the operation of plastic zones and plastic hinges.
The movement of teeth is not a simple deformation process.
The deformation process conditions were the same for each of the tubes.
He made notable contributions to understanding the plastic deformation process.
This type of plastic deformation process creates a product having disadvantageous strength and rigidity.
Consideration of the transient part of creep in the deformation process.
The velocity of the deformation process is typically from one to three meters per minute.
Generally the flanges are produced by a permanent material deformation process.
Gauges Surface Finish Hot deformation process Cold deformation processes i cut Machining by chip removal.
Sterilization is carried out after or during the dehydration or deformation process.
The deformation process can be represented in a stress / strain diagram.
Then we analyze the structural properties of structures subjected to uniaxial deformation process.
See also
A permanent deformation process for keratin fibers comprising the steps of,.
The process by which this is achieved in this case is a material deformation process.
A deformation process which uses a fluid-filled flexible bladder in direct contact with the workpiece.
The proposed methodology seeks to give insight into the deformation process.
Figure 5 illustrates the first part of a deformation process and Figure 6 the continuing process.
The shape of a solid or structure changes with time during a deformation process.
For cylindrical stents, the deformation process is a rolling process, as shown.
The introduction of time continuity allows to introduce new constraints in the deformation process.
Electrical crimping is a plastic deformation process of a contact ( component ) on a multi-strand wire.
Known means for fixing sponges to a conventional sponge mop oppose this natural deformation process.
Evolution of force-chains and grain-loops are investigated during the deformation process until reaching the failure.
Furthermore, the tapering of the end portion 50 aids the initialization of the deformation process.
FIG . 3 illustrates the deformation process.
The área under each curve represents the energy dissipated during the deformation process.
In such cases many people use Achilles tendon exercises that stop deformation process.
In a tensile test, strain increases and stress changes gradually in a deformation process.
The metal substrate can be biaxially textured, for example, by deformation process.
Fig . 10 illustrates schematically the result of this deformation process.
However, the pinch-seal point 137 may have been trimmed prior to the bottom deformation process.
You'll also be interested in:
Examples of using Deformation
Show more
No damage or deformation of the seat frames was observed
Gentle braking can avoid this deformation
Device for measuring deformation of a gravity dam
Examples of using Process
Show more
The globalization process is intensifying these pressures
Process by which this report has been prepared
Its implementation process includes the following
