Examples of 'degreased' in a sentence
Meaning of "degreased"
The verb 'degrease' means to remove grease or oil from a surface, typically using a cleaning agent or solvent
Show more definitions
- simple past tense and past participle of degrease
How to use "degreased" in a sentence
Basic
Advanced
degreased
The aluminum is first degreased in an acetone bath.
The degreased member may be used as it is or after coating.
A flat glass surface was degreased with acetone.
A panel was degreased using an alkaline detergent wash.
Stents were cleaned and degreased and dried.
Degreased myself and decided to sleep on it.
The samples were degreased in acetone prior to testing.
The coating surface of the substrate is preferably degreased.
Combs should be degreased in alcohol or methylated spirits.
Beverage can tab stock is degreased and oiled.
On degreased steel and aluminium.
The component was completely degreased under these conditions.
Pieces are degreased before painting by means of phosphate and passivation treatments.
The plates were degreased with xylene.
Using a pipet apply a small amount to an aluminum degreased panel.
See also
Aluminium can be degreased with water and ammonia.
Thereafter the aluminium plates were degreased and dried.
They will be degreased in a detergent bath.
This lens substrate was thoroughly degreased with acetone.
The machinery is degreased and ready for this initiative.
The parts are then degreased.
The substrate strip is degreased beforehand in an alkaline solution.
Fasteners on clean and degreased.
The brass substrates were degreased prior to deposition of copper.
Then degreased and then used in an oxidation test described below.
The first group was simply degreased by means of trichlorethane.
Workpieces contaminated with oil and grease should be degreased prior.
The plastic substrates were degreased by wiping with isopropanol.
In a first step the surface of the stainless steel sheet is degreased.
The tube specimens were degreased in acetone prior to measurements.
The surface of the papillomatous focus is preliminarily degreased with alcohol.
Both samples were degreased and washed with tap water.
The wire is then degreased.
All samples were degreased and washed with tap water.
The components were degreased.
Solvent degreased wool.
Each test piece for analysis was sufficiently degreased and washed.
The third group was degreased and then underwent a phosphate treatment.
Prior to use the test plates were degreased with acetone.
Each sample was degreased in acetone before being subjected to the corrosion test.
Apply on clean and degreased surface.
It is initially degreased and cleaned to remove any dirt from its surface.
The substrate may then be degreased and cleaned.
The substrate was degreased beforehand in an alkaline solution and scoured with acid.
Always place the machine on degreased and dry surfaces.
Make sure that new electrode and nozzle are clean and degreased.
It does not have to be cleaned or degreased before injecting the polyurethane.
The grease does not remain in the immediate proximity of the pieces to be degreased.
Both types of test piece were degreased before corrosion testing.
Make sure that new electrode and nozzle to fit are clean and degreased.
