Examples of 'delay setting' in a sentence
Meaning of "delay setting"
The phrase 'delay setting' generally means intentionally postponing or putting off the determination or establishment of something. It implies a deliberate decision to delay making a decision, taking action, or finalizing a plan or arrangement
How to use "delay setting" in a sentence
Basic
Advanced
delay setting
There is no delay setting for the centre channel.
Checking the answer delay setting.
The time delay setting is not active during testing.
Whether the load output has a delay setting.
The delay setting may be selected from the center of the bin.
This difference is the delay setting.
Remember audio delay setting in the file properties for the current file.
Drinking gelatin solutions or large volumes of water may delay setting.
This encoder provides a time delay setting expressed in meters.
One of the delay lights will flash to show the current delay setting.
You can cancel or change the delay setting before you press the button.
These particles were also used to the determine the optimal droplet delay setting.
Delay setting modification times and permissions of extracted directories until the end of extraction.
Press the ENTER button to save the time delay setting.
The delay setting determines the length of silence between hitting a note and the attack.
See also
Failure to identify land likely to delay setting up of IIT in Goa.
After another delay setting a pump into operation for feeding the sonotrode with composition.
High levels of phosphate may delay setting time ;.
The Audio out delay setting should be switched on.
If the delayed start option is set, cancel the delay setting or.
If you want to cancel the Delay Setting countdown and start the program immediately.
When a preset value is exceeded, the units influence a output relay after a delay setting.
Use delay setting by electronic relay NMET.
In this example, it is the delay setting in the center of the bin.
Then, turn on the dishwasher again and select a new cycle with a new delay setting.
Press the Delay Setting selection button and set the delay time you wish.
Each press of the Delay button advances the delay setting in 1 hour increments, from.
The MIDI delay setting is an example of a zone-programmable function.
In addition, it has a Framerate and Delay setting.
The audio delay setting does not work when “ YIT ” is selected as the input source.
Change the Auto Answer Delay setting to 0 seconds.
An ' off ' push button telegram is sent once on expiry of the time delay setting.
The synchronization and delay setting block 30 has been described hereinabove.
Delay setting ( = distance to listening location ) in centimetres.
Each press of the Delay Timer button advances the delay setting in 30 minutes increments from 0.
Acceleration delay setting can be planned ( making the crane run smoother ) ;.
Program up to 24 hours with the Delay Setting function.
Changing the answer delay setting > 2 sec Press and hold down on the bottom of.
You'll also be interested in:
Examples of using Setting
Show more
I am setting the bar low so we are not disappointed
Adjust the volume setting to an audible level
Setting the running date and time
Examples of using Delay
Show more
Recording delay occurs during locomotive power up
Damaged gaskets must be replaced without delay
Delay in treatment can lead to amputation or death
