Examples of 'density of the foam' in a sentence
Meaning of "density of the foam"
density of the foam: Indicates the compactness or thickness of a foam substance
How to use "density of the foam" in a sentence
Basic
Advanced
density of the foam
The density of the foam is an important factor.
The difference is in the density of the foam.
The density of the foam relates to the quality.
Due to the crushing the density of the foam may increase.
Higher microsphere concentrations generally cause lower density of the foam.
The density of the foam was then measured after about one hour.
It would be desirable to decrease the density of the foam by increasing water content.
The density of the foam was obtained by dividing the mass by the volume.
The blowing agent is used primarily for controlling the density of the foam.
Adjusting the density of the foam in response to the measured electrical conductivity.
The amount of blowing agent generally corresponds to the desired density of the foam.
Means for altering the density of the foam in response to said measured electrical conductivity.
By density, we mean the overall average density of the foam.
The density of the foam is determined according to the following formula,.
The closed cell content and the density of the foam cores are not recorded.
See also
The higher the proportion of propellant, the lower the density of the foam.
In particular, density of the foam decreases as the diameter of the small aperture increases.
With alteration of the water content, the density of the foam also alters.
The density of the foam is almost 10 times smaller than that of pure solid nickel.
In general, the higher the microsphere concentration, the lower the density of the foam.
The density of the foam used in the sensory interaction test was 33 mm.
Thus, the density of the foam is written as, EPMATHMARKEREP.
The density of the foam ceramic is preferably below 30 % to ensure substantially totally interconnected porosity.
The density of the foam was calculated using the following formula, EQU1.
The density of the foam increases from the exterior of the absorbing layers 12, 16 inwardly.
You'll also be interested in:
Examples of using Foam
Show more
The majority of foam that we see is natural
Foam fill pipe with level regulation
The insulation foam contains flammable gases
Examples of using Density
Show more
Reduces bulk density and increases porosity
Density and volume under changes in temperature
Measure the particle density of the thermosphere
