Examples of 'density values' in a sentence
Meaning of "density values"
density values: These are numerical measurements used to quantify the compactness or concentration of a substance or material
How to use "density values" in a sentence
Basic
Advanced
density values
The optical density values are used as thresholds.
Calculation result based on the volume and density values.
Optical density values were recorded for each well.
Mole fraction values are obtained from water density values.
Best approximated density values are entered into the strata series.
A volume analysis on each band was performed to obtain density values.
Migration of cells was evaluated by volume density values acquired by a densitometer scanner.
This increase is demonstrated by the higher optical density values.
All subsequent image density values are multiplied by this calibration coefficient.
This system loses its hyperbolicity for certain density values.
The table includes mean density values for several common liquids.
Averages of duplicate wells were calculated as the final optical density values.
The pH and specific density values were taken simultaneously by colorimetry on a single strip.
It should be noted that the graphic representation of the density values in fig.
Density values were estimated for all lithological units from measured samples.
See also
The density was determined by averaging the density values of at least three test specimens.
Film density values were also measured along each profile using a scanning microdensitometer.
These two steps are repeated until the density values meet the constraints.
Higher crosslink density values indicate a higher degree of crosslinking in the coating.
A total of three samples would be evaluated and averaged for the density values.
Increase in density values can be seen both on dye and pigment inkjet systems.
Hydrostatic level applications are require generally stable density values to maintain the overall accuracy.
The temperature and density values are displayed normally and output via the outputs.
A normal mouse será pool was used to establish baseline optical density values in the assay.
The density values given above apply for absorbent bodies of cellulose fluff pulp.
An aluminium phantom device with known density values was included in each radiograph for calibration.
Density values for these structures are calculated from their basis weight and caliper.
A formulation with lower optical density values is proposed as having greater overall physical stability.
At least one candidate directional range is selected in accordance with the associated density values.
Clones with optical density values of at least twice the background value were further characterized.
This was subtracted from each of the optical density values for the experimental points.
Optical density values were plotted as a function of reaction time and fitted with linear regression.
Display means for displaying the electron density values determined by the data processing device.
The density values indicate the level of degassing that occurred during the neutralization.
The image signals include fluorescent emissions and optical density values on a per pixel basis.
The optical density values for the unknown samples are compared with the positive controls.
Color separations: adjusting ink density values.
The measured density values were somewhat higher than the values found in the literature.
Listed below are some published density values for the cell types given,.
Density values for cores of this type can be calculated from basis weight and caliper.
Converts Prescale density values into pressure values.
Density values previously judged doubtful, erroneous, or missing are not considered.
Thus, the pixels indicated by the density values are exactly represented as an image.
Density values have been established and standardised from available information about the building 's use.
The measured electric field or power density values must be averaged for a period of 6 minutes.
Content reference to: Adjusting ink neutral density values.
Summing the digital density values within the selected área and subtracting the background density value.
For a continuous distribution, Minitab calculates the probability density values.
The optical density values are obtained from an ELISA spectrophotometer.
Spatially resolved optical measurements such as cathodoluminescence ( CL ) and µRaman confirmed the electron density values.
You'll also be interested in:
Examples of using Density
Show more
Reduces bulk density and increases porosity
Density and volume under changes in temperature
Measure the particle density of the thermosphere
Examples of using Values
Show more
The measured values shall be plotted on a graph
Date and time revert to default values
Carrying values and estimated fair values
