Examples of 'depress and hold' in a sentence
Meaning of "depress and hold"
depress and hold: This term is commonly used in engineering or mechanics to describe a process of pushing down and maintaining pressure on a particular object, component, or mechanism
How to use "depress and hold" in a sentence
Basic
Advanced
depress and hold
Depress and hold the brake pedal.
Use a sturdy container to depress and hold the water.
Depress and hold the foot switch.
To turn on the stroboscope, depress and hold the trigger.
Depress and hold spindle lock button.
To lock the spindle, depress and hold the lock button.
Depress and hold depth adjustment lock but.
To remove the suction tube, you must depress and hold.
Depress and hold the throttle lockout lever.
Using a sturdy container, depress and hold the water dispenser paddle for 5 seconds.
Depress and hold the switch for one full minute.
To advance hands rapidly, depress and hold push buttons for longer than one second.
Depress and hold the spindle lock and rotate the.
To stop the engine, depress and hold the STOP switch.
Depress and hold the button to activate the automatic light sensor.
See also
Depress trigger lock-off button ( I ) and subsequently depress and hold trigger switch A.
Depress and hold the foot switch down with left foot.
To remove tubing ( illustration D ), depress and hold gray collet.
Fully depress and hold the brake pedal with your left foot.
To rotate the front scroll housing, depress and hold the lock button ( A ) Fig . 9.
Fully depress and hold the brake pedal and bring the vehicle to a stop.
To advance hand rapidly, depress and hold push button A for longer than one second.
Depress and hold single switch to return to neutral until tilted into the desired position.
Simultaneously depress and hold down the ON and OFF buttons.
Depress and hold the shaft lock button while rotating the collet nut and shaft.
To remove tubing, depress and hold red or blue collet ; pull tubing out to remove.
Depress and hold gas knob while lighting the pilot with the push button igniter.
To remove accessories, depress and hold the spindle lock and turn the accessory counterclockwise.
Depress and hold the spindle lock and rotate the clamp nut until the spindle locks.
To turn the saw ON, depress and hold lock-off button, then depress the switch trigger.
Depress and hold trigger switch lockout mechanism A.
E To turn off, depress and hold the Start / Stop key for two seconds.
Depress and hold the ALARM SET button.
Continue to depress and hold the ALARM SET button and repeatedly press the MINUTE button.
Depress and hold the button for 2 seconds to turn the blower off.
Continue to depress and hold the CLOCK SET button and repeatedly press the MINUTE button.
Depress and hold the spindle lock button while installing, changing, or removing the blade.
Only depress and hold the lock button when installing, changing or removing the blade.
Depress and hold trigger switch 1 then slowly feed wheel into work with firm pressure.
Depress and hold depth adjustment lock button ( Q ) before sliding the indexed depth.
Depress and hold the on / off button.
Depress and hold the lock button while installing, changing, or removing blade.
Depress and hold the clutch pedal ( vehicles with a manual gearbox ) or brake.
Depress and hold Stop / Clear button about 3 seconds.
Depress and hold the spindle lock button 11.
Depress and hold the spindle lock button ( 11 ) to stop the spindle from turning.
Depress and hold lock-on button ( B ) while releasing trigger.
Depress and hold down spindle lock ( B ) and turn collet nut ( C ) counterclockwise with.
