Examples of 'depress the switch' in a sentence
Meaning of "depress the switch"
The phrase 'depress the switch' is an instruction or command to push or lower a switch, button, or lever, typically to activate or control a device or mechanism. It suggests exerting downward pressure or force on the switch to initiate a specific action or outcome. The phrase is often used in technical or electrical contexts to explain the operation of switches or controls
How to use "depress the switch" in a sentence
Basic
Advanced
depress the switch
Depress the switch again to stop the blend.
Apply downward pressure and slowly depress the switch trigger.
Depress the switch trigger and release immediately.
The tool speed depends on how far you depress the switch.
Depress the switch trigger to start the screwdriver.
Plug the appliance to power outlet and depress the switch to begin operation.
Depress the switch trigger to start the drill.
Place the bit on the screw head and slowly depress the switch trigger.
Depress the switch trigger to start the tool.
Plug the power base into the electrical outlet and depress the switch into the.
Depress the switch lever and release it again.
To start the blower, depress the switch trigger.
Depress the switch trigger again to resume operation.
To activate the level, depress the switch button slightly.
Depress the switch and the red light.
See also
To unlock the switch, depress the switch button again.
Depress the switch long enough to perform the function.
To start the tool, first depress the switch lever.
Please depress the switch to operate the drill again.
Hold the tool firmly with your left hand, depress the switch.
Depress the switch lever and hold it in that position.
To release the lock, depress the switch trigger and release.
Depress the switch trigger to start the cutting action.
To relieve the clamping force, depress the switch in the opening direction.
Depress the switch when directly connecting a guitar or other instrument.
After pulling back the trigger of the switch, depress the switch stopper.
Depress the switch and the red light will glow.
To facilitate continuous operation, pull the trigger switch and depress the switch stopper.
Depress the switch and fasten for the proper fastening time.
Slide the lock-off button to the unlocked position and depress the switch trigger.
Depress the switch to start the tool and release it to stop your tool.
To turn your drill ON, depress the switch trigger.
Depress the switch trigger all the way for maximum speed and torque.
To turn on the sander, Depress the switch trigger.
Depress the switch trigger only part of the way for less speed and torque.
To turn the saw on, Depress the switch trigger.
Depress the switch trigger and allow the saw blade to reach full cutting speed.
To turn the screwdriver ON, depress the switch trigger.
Third, depress the switch to turn off the flashlight.
To turn the caulk gun ON, depress the switch trigger.
Depress the switch to turn the router on, release to turn it off.
To turn the angle grinder ON, depress the switch trigger.
First, depress the switch to turn on only the flourescent lamp.
Make sure the tool is square to the tubing and depress the switch Figure 7.
To turn the unit off, depress the switch back down into the motor housing.
To start the planer, Push the lock-off button, and then depress the switch trigger.
To turn it OFF, depress the switch to the off position.
To turn the saw ON, depress and hold lock-off button, then depress the switch trigger.
Depress the switch lock button and slide the OFF / ON switch upwards.
To turn your saw on, depress the switch.
You'll also be interested in:
Examples of using Switch
Show more
The floating switch is blocking in automatic operation
Opera never survived the switch to electric
Set the switch to the correct position
Examples of using Depress
Show more
Depress the guard to remove the blade
Use a small pin to depress these buttons
Depress the foot control to start sewing
