Examples of 'depth gauge' in a sentence
Meaning of "depth gauge"
A depth gauge is a measuring instrument or device used to determine the depth or distance from a reference point to a specific object or surface. It is commonly used in fields such as engineering, construction, and marine industries to measure the depth of water, soil, or other materials
How to use "depth gauge" in a sentence
Basic
Advanced
depth gauge
Slide the depth gauge rod backward.
Setting the drilling depth depth gauge.
Turn the depth gauge to the right.
The lab returned the depth gauge.
Turn the depth gauge to the left.
Release the screw at the depth gauge.
Refit the depth gauge to the tool.
Except on the boat it is the depth gauge.
Remove the depth gauge or the magazine by.
General advice on adjusting depth gauge setting.
Place depth gauge tool on the cutter.
For tools with depth gauge.
The depth gauge could also be a match.
Tighten the screw at the depth gauge firmly.
Pull the depth gauge up until it stops.
See also
Toothed side of the depth gauge.
Release the depth gauge clamping screw.
Depth gauge hull valves secured.
Tighten the depth gauge clamping screw.
Use a flat file to file the depth gauge.
Slide the depth gauge rod backward or forward.
Temperature indicator light depth gauge.
Adjust the depth gauge to the desired depth.
Take care when attaching the depth gauge.
Remove the depth gauge or screw guide by pulling.
The lab boys analyzed the depth gauge.
The depth gauge is falling off the chart.
The lab has researched the depth gauge.
Insert the depth gauge through hole in handle.
Reliable and accurate depth gauge.
The depth gauge is as important as proper.
Position the sample using the depth gauge.
Tighten the depth gauge adjustment knob securely.
Remove the guard or pull the depth gauge forwards.
Slide the depth gauge rod backward or for.
Round off the front of the depth gauge again.
The depth gauge controls the tilling depth.
Required distance between depth gauge and cutting edge.
The depth gauge can be removed simply by pulling it.
Flat file q depth gauge jointer.
My depth gauge says we are five kilometers off course.
Distance between depth gauge and cutting edge a.
Depth gauge is not changing.
I notice it has a depth gauge on the back side of it.
Follow these steps to adjust the depth gauge rod.
Push the depth gauge down as far as it will go.
Sharpening your chain and adjusting depth gauge setting.
The depth gauge can not be used at the position.
Add a piece of tape to the drill bit as a depth gauge.
The cutter depth gauge clearance is reduced as cutters are sharpened.
You'll also be interested in:
Examples of using Gauge
Show more
And gauge how we might come together
Slide the depth gauge rod backward
Pressure gauge to detect blockage of secondary filter
Examples of using Depth
Show more
A small amount of depth of cut can be obtained by
Depth measurement also includes door handle
Reassemble the depth guide and reattach
