Examples of 'depth of the grooves' in a sentence
Meaning of "depth of the grooves"
depth of the grooves: This phrase typically refers to the measurements or characteristics of the indentations or cuts in a particular surface, such as tire grooves on a road or vinyl grooves on a record
How to use "depth of the grooves" in a sentence
Basic
Advanced
depth of the grooves
The depth of the grooves can be varied.
This depth corresponds to the depth of the grooves in the prior art.
The depth of the grooves is therefore also limited.
This first machining step ends when the desired depth of the grooves is reached.
The depth of the grooves obtained is controlled by the pressure applied.
In a particular embodiment, the depth of the grooves goes on increasing.
The depth of the grooves is considerably exaggerated in the drawing for illustration convenience.
Thus, the width and depth of the grooves are very small.
The depth of the grooves is about equal to a quarter wavelength at the same frequency.
Device according to claim 2, wherein the depth of the grooves increases linearly.
Such a reduced depth of the grooves allows to achieve several important advantages.
Moreover, this distance is advantageously at least three times the depth of the grooves.
The maximum depth of the grooves may be adapted to the activation effect desired.
If the number of grooves 38 is increased, the depth of the grooves can be reduced.
The depth of the grooves or the pitch can be varied to achieve rigidity changes.
See also
In this particular instance, the depth of the grooves is equal to 100 mm.
The depth of the grooves was measured using the following method,.
For the preconcentrator chip, the etching depth of the grooves is set at 400 um.
Also, the depth of the grooves is not particularly limited.
For the microcolumn chip, the etching depth of the grooves is set at 200 um.
The depth of the grooves are approximately 38 nm.
The thickness of the elastomeric sound damping segments equals the depth of the grooves ( 50 and 52 ).
The radial depth of the grooves is about 1 mm.
However, the height of the step should not exceed the depth of the grooves 100.
The depth of the grooves in this embodiment is about 50 nm.
Preferably, the depth of the grooves may be approximately 0.5 mm.
The depth of the grooves is chosen to be equal to the thickness e2 ;.
Preferably the depth of the grooves is within the range 0.5 mm to 5 mm.
The depth of the grooves or irregularities is advantageously of the order of 0.1 mm.
The depth of the grooves 26 will vary for different applications of the vacuum fixture 10.
The depth of the grooves 37 is smaller than the height of the projections 11a.
The depth of the grooves 16 is substantially less than the length of the grooves 16.
The depth of the grooves 22 is denoted as V.
You'll also be interested in:
Examples of using Grooves
Show more
Notice the grooves inside the belt
Grooves are provided to indicate the adjustment position
Place wood shelves on grooves at height desired
Examples of using Depth
Show more
A small amount of depth of cut can be obtained by
Depth measurement also includes door handle
Reassemble the depth guide and reattach
