Examples of 'depth stop' in a sentence
Meaning of "depth stop"
Depth stop is a mechanical or electronic device used to limit the depth or penetration of a tool or device. It prevents the tool or device from going beyond a specific point
How to use "depth stop" in a sentence
Basic
Advanced
depth stop
Wing bolt for depth stop adjustment.
Fastening bolt for rebating depth stop.
Only the depth stop did not convince us.
Always correctly adjust the depth stop.
Lift depth stop as far as it will go.
Fitting and setting the depth stop.
Rotate the depth stop adjustment knob until it.
Needle assembly with removable depth stop.
Depth stop rod adjustable pointer.
Button for depth stop adjustment.
Release button for depth stop.
Loosen the depth stop rod locking screw.
Raise to increase the cutting depth stop as desired.
Lock the depth stop at the right height.
Brackets for fixing the depth stop adjustment.
See also
Set the depth stop to the required drilling.
Movement backwards and forwards of the depth stop.
The adjustable depth stop gives precise control of.
Wing screw for depth stop.
Lower the depth stop until it contacts the base.
Fitting fence and depth stop.
Insert the depth stop into the additional handle.
Tighten the screw to lock the depth stop at position.
Press the depth stop rod release button to lower.
Then retighten the knurled screw of the depth stop.
Release the depth stop clamp.
No longer is the thumb or finger needed to act as a depth stop.
Securely tighten the depth stop bolt before use.
The depth stop screw allows the depth of cut to be adjusted.
Drilling depth with depth stop and drill sleeve.
The depth stop is a convenient feature to ensure uniformity in drilling depth.
Depth adjustment using the graduation and revolver depth stop.
Insert the depth stop into the hole in the.
Screw the depth adjuster onto the revolver depth stop.
Remove the depth stop from the hammer side handle.
Ensure that the toothing on the depth stop is facing upwards.
Pull the depth stop back by the required drilling depth.
The protective sleeve allows use of depth stop on surgical tools.
Fix the depth stop by turning the thumb screw clockwise.
Tighten the plunge limiter by turning the depth stop bolt clockwise.
Then clamp the depth stop by rotating the handle clockwise.
Place a depth template between the depth stop and the revolver.
Push the depth stop to the length of the inserted drill.
For chamfering the fence and depth stop need not be fitted.
The revolver depth stop can be used to set three different depths.
Use a screwdriver to adjust the three screws on the rotating depth stop.
Do not change the revolver depth stop while the router is running.
The depth stop rod helps control the depth of drilled holes.
Repeat the cut until the depth stop touches the workpiece.
The drill throw is adjusted depending on where the depth stop is set.
You'll also be interested in:
Examples of using Stop
Show more
They would not stop killing sharks
Next stop menswear and sporting goods
That is not gonna stop me from trying
Examples of using Depth
Show more
A small amount of depth of cut can be obtained by
Depth measurement also includes door handle
Reassemble the depth guide and reattach
