Examples of 'desired depth' in a sentence
Meaning of "desired depth"
Refers to a specific depth or level that is wanted, preferred, or required for a particular purpose
How to use "desired depth" in a sentence
Basic
Advanced
desired depth
Make successive passes to achieve desired depth.
Align the desired depth measurement with the.
Reposition and retighten to desired depth location.
Any desired depth in flowing water can be effected.
King on the way to the desired depth.
Add the desired depth of cut to the starting position.
Slide the ruler to the desired depth.
Drill to the desired depth without the need to peck.
Excavate that area to the desired depth.
Preselect the desired depth of cut with the cutting.
Adjust as necessary to increase or decrease the desired depth.
Adjust guard to desired depth of cut.
Continue adjusting the locator to the desired depth.
The desired depth is adjusted by attaching spacers to the cannula.
Adjust the depth gauge to the desired depth.
See also
Align the desired depth measurement with the arrow on the tool.
Lower the saw blade to the desired depth.
Lower the weight to the desired depth as indicated on the depth meter.
Turn wheel in direction of arrows to achieve desired depth.
Place the housing at the desired depth in the opening.
Release trigger when the fastener is at the desired depth.
Raise the cutters to the desired depth of cut above the insert.
Adjust saw shoe so blade cuts at desired depth.
The desired depth and slope are entered into the control box.
Drilling continues until the desired depth is reached.
The desired depth of the wound is dependent upon the the condition to be treated.
Set the foam plugs to the desired depth.
Till a small area to the desired depth first and then move to the next area.
Ate feed rate and to the desired depth.
When you reach the desired depth you can remove the drill from the hole.
Core out holes to desired depth.
In doing so, a desired depth of needle penetration can be achieved more precisely.
The junction can be placed at any desired depth.
It may be possible to achieve the desired depth with air pressure adjustments alone.
The exposed área is then etched to a desired depth.
The defective tissue is removed to a desired depth d over a predetermined área on the cornea.
Slide the depth of cut indicator to the desired depth.
Adjust the depth gauge to the desired depth and tighten the clamp screw.
Allows operator to adjust drill press to drill to a desired depth.
Move the tool base until the desired depth of cut is obtained.
Continue using progressive cuts until near the desired depth.
This procedure is repeated until the desired depth of the refractory is attained.
It will take approximately one month to reach the desired depth.
Adjust the carriage height until the desired depth of cut appears on the gauge.
Adjust the saw base plate so the blade cuts at desired depth.
Adjust the depth gauge to the desired depth and tighten the wing bolt.
Adjust the saw shoe so the blade cuts at desired depth.
Adjust the depth gauge to the desired depth and tighten the thumb screw.
Position the shoe assembly for the desired depth.
Adjust the depth gauge to the desired depth and then tighten the side grip firmly.
You'll also be interested in:
Examples of using Depth
Show more
A small amount of depth of cut can be obtained by
Depth measurement also includes door handle
Reassemble the depth guide and reattach
Examples of using Desired
Show more
Desired range of visibility of the navigation light
Turn until the desired volume is gained
In desired locations when the oven is cool
