Examples of 'desired mechanical' in a sentence
Meaning of "desired mechanical"
desired mechanical: This phrase refers to a mechanical item or feature that is sought after or aspired to. It implies that there is a specific mechanical quality or attribute that is coveted or wanted
How to use "desired mechanical" in a sentence
Basic
Advanced
desired mechanical
C is included to secure the desired mechanical strength.
Some of the desired mechanical stability would however be lost.
The part being cooled at a rate to obtain desired mechanical characteristics.
Herewith the desired mechanical properties and the pickling properties are achieved.
Microstructure or to obtain desired mechanical properties.
The desired mechanical and technological properties are achieved by the targeted orientation of the strands.
You want it to have found desired mechanical properties.
Thus, the desired mechanical strength can not be obtained.
Sintering is an important technique in the give the desired mechanical properties.
The spoke has attained the desired mechanical properties when it passes the heat treatment stage.
The step of extrusion itself may provide the desired mechanical deformation.
As a result, desired mechanical properties and thermal stability can no longer be obtained.
Production of homogeneous microstructure and obtain desired mechanical properties of steel.
A stent with the desired mechanical property ( ies ) may then be fabricated from the tube.
This surface degradation should not affect the desired mechanical properties.
See also
The typical desired mechanical properties of a partially annealed sheet are shown in Table II below,.
Preferred materials generally depend on the desired mechanical properties of the valve component.
Microscale structural metamaterials are synthetic structures that are aimed to yield specific desired mechanical advantages.
This pretensioning depends on the desired mechanical properties of the carcass reinforcement.
Other angles of orientation may be used in order to attain the desired mechanical properties.
The selected polymers should fit the desired mechanical and physical stability of bladder 12 in vivo.
The folding allows space to be saved without significantly modifying the desired mechanical features.
A wide range of desired mechanical and thermal properties by the careful selection of ( A ), ( B ) and ( C ).
Heat treatments for your products to impart them the desired mechanical properties.
Low rutting and high fatigue resistance are desired mechanical behavior in a good road surface coating.
The folding makes it possible to save space without significantly modifying the desired mechanical properties.
The assembly thus obtained exhibits all the desired mechanical strength and safety qualities.
This makes it possible to obtain locally the necessary thickness for the desired mechanical strength.
In particular, if the Ti content exceeds 0.1 %, a desired mechanical strength can not be obtained.
The enteric coating layers may also contain pharmaceutically acceptable plasticizers to obtain desired mechanical properties.
Furthermore still crosslinking is necessary to obtain the desired mechanical properties of the final product.
These structures have an isotropic behavior that imparts to them desired mechanical characteristics.
The nature and amount of the waxes depend on the desired mechanical and textural properties.
Another plastifier can be added to dibenzoate B to modify a desired mechanical property.
The choice of a filler metal primarily depends upon weldability, desired mechanical properties, or corrosion resistance.
A minimum content of 2 % by weight is required to obtain the desired mechanical properties.
Furthermore, the resulting structure exhibits the desired mechanical characteristics.
Post-insolation is possible in order to achieve the desired mechanical properties.
In other embodiments, gear means provide the desired mechanical advantage.
In this case, the initial position is no longer the desired mechanical zero.
Aluminium as most of metals, requires heat treatments to obtain the desired mechanical properties.
Thus, after heating, the adhesive will ensure the desired mechanical connection.
Under these conditions, the component obtained does not have the desired mechanical properties.
Yet further, other crimping configurations may be employed to provide the desired mechanical interlock.
The compacted, moulded core may then be sintered to obtain desired mechanical strength properties.
Drying, debinding and sintering usually follow to give the part the desired mechanical properties.
Prior to the encapsulation, SMA needle 7 is processed to obtain the desired mechanical behavior.
Like C, it is included to secure the desired mechanical strength.
But the examples E-1 to E-7 show that it is possible to reach the desired mechanical properties.
You'll also be interested in:
Examples of using Desired
Show more
Desired range of visibility of the navigation light
Turn until the desired volume is gained
In desired locations when the oven is cool
Examples of using Mechanical
Show more
Mechanical tensile test prehoistable navigation lights
Reduce the risk of mechanical damage to a minimum
Mechanical connection model parameters and interface
