Examples of 'desired torque' in a sentence
Meaning of "desired torque"
desired torque: The specific rotational force or power that is required or preferred in a given situation
How to use "desired torque" in a sentence
Basic
Advanced
desired torque
Slide the switch to the desired torque setting.
Desired torque type selector.
This wedge is used to set the desired torque.
You should set the desired torque in the practical work.
Set the torque selector switch to the desired torque.
Particular design concern is to obtain desired torque capacity between these two structures.
Thus the fastener is turned by the hex socket to a desired torque.
You will know that you have reached your desired torque when you hear a distinct click.
The rotating magnetic field should have a sufficient magnitude to provide the desired torque.
Make a test fastening to get the desired torque before operation.
Determining a desired torque corresponding in particular to driver demand ;.
No further components are required in order to achieve the desired torque limitation.
The calculation of the desired torque C is carried out by successive iterations.
The load angle controller receives as input value the desired torque Tref.
The vertical axis corresponds to the desired torque value Tref and to the rotor speed w.
See also
If you keep operating, you may not obtain the desired torque.
The setting of the desired torque is done steplessly without add-on tool.
The open área may be smaller or larger depending on desired torque and drag characteristics.
The setting of the desired torque is done steplessly with the add-on tool.
As a result, the efficiency at the current speed and desired torque is maximized.
Moreover, the desired torque characteristics should be repeatable from valve to valve without significant variation.
You will also hear or feel a click once your desired torque setting has been reached.
Practice with various fasteners, noting the length of time required to reach the desired torque.
Corresponding times and values of the desired torque Tref are also indicated in Fig . 2.
Select the desired torque number using the torque adjustment collar ( C ) on the top of tool.
Equation A can be used to calculate the desired torque response of a pod.
Consequently, the desired torque C increases less rapidly and the vehicle accelerates less powerfully.
Dimensions of the cantilever tail can be varied to achieve a desired torque and / or a desired stiffness.
Determining a desired torque corresponding to the driver 's torque demand ;.
However, this limitation has no effect as long as the desired torque also remains constant.
The course of the desired torque Tref in Fig . 2 has a trapezoidal form.
Adjust power dial ( if it is available ) to desired torque.
Set the torque-adjusting collar for the desired torque and set the speed.
As a result, the axle 112 can be driven at a desired rotation speed and a desired torque.
By matching torque load with produced torque, motor 300 operates at a desired torque or speed.
This two-term signal is introduced into power amplifier 3 applying the desired torque to motor 4.
Matching torque load with produced torque causes motor 104 to operate at a desired torque or speed.
Turn the torque adjusting ring ( 2 ) to select the desired torque.
You'll also be interested in:
Examples of using Torque
Show more
The resulting torque introduces the rotation
Torque for terminal box cover screws
Low level inducement torque reduction scheme
Examples of using Desired
Show more
Desired range of visibility of the navigation light
Turn until the desired volume is gained
In desired locations when the oven is cool
