Examples of 'desulfation' in a sentence
Meaning of "desulfation"
Desulfation is the process of removing sulfur from a substance or compound. It is a noun and is commonly used in the context of chemistry and environmental science, particularly in the treatment of sulfur-containing compounds
Show more definitions
- The removal of sulfate
How to use "desulfation" in a sentence
Basic
Advanced
desulfation
Desulfation with pulsing for sulfated batteries.
Partial solvolytic desulfation of the salt of the step a.
The sulfonate groups are not therefore globally affected by the desulfation process.
The desulfation mode is discussed below.
Typically the bed will cool off during the desulfation of the solid oxide.
These desulfation and regeneration operations however involve quite significant drawbacks.
It will flash if the charger goes into Desulfation mode.
Desulfation is a process of repeatedly sending short current surges through the damaged battery.
Method and device intended for desulfation of a nitric oxide trap and regeneration of a particle filter.
Metabolism Enoxaparin is metabolized in the liver by desulfation and depolymerization.
Activation of the special desulfation mode is indicated by blinking the CHARGING LED.
Desulfation can be accomplished faster by lyophilizing, drying or vacuum distilling the alkaline heparin solution.
The identification of the product formed during the desulfation reaction is performed by NMR.
If desulfation fails, charging will abort.
The CHARGING LED will blink when the special desulfation mode is activated.
See also
These alternations of desulfation and regeneration operations are continued until the time t 2 n.
According to a second aspect, there is provided a desulfation method for a lead-acid battery.
If desulfation fails, charging will be aborted and the digital display will blink.
According to a first aspect, there is provided a desulfation device applicable to a lead-acid battery.
If desulfation fails, charging will abort and the digital display will blink.
The following describes the operations of the desulfation device 10 according to the embodiment.
Extent of desulfation need not be the same at each O-position.
Hence, there is a trend in the art emphasizing desulfation and moving away from hypersulfation.
Desulfation at the 6-O position can not be determined by currently available techniques.
The standard and high voltage TURBO desulfation mode are de-activated.
The desulfation device 10 operates with the electric current supplied from the battery BT.
Set the type of battery to be charged, or Desulfation Mode.
Partial solvolytic desulfation of the salt of the organic base of the step a ;.
When blinking, the charger has switched to the Desulfation Mode of operation.
If desulfation fails, charging will abort see Aborted Charge section.
All program features are active, including Standard, TURBO and PULSE desulfation mode.
Desulfation Preliminary experiment ( for determining the optimum ARS concentration ).
Fig . 10 illustrates a temperature change during operation of the desulfation device of to the embodiment.
If desulfation fails, charging will abort and the CHECK LED will blink.
Fig . 9 illustrates a temperature change during operation of the desulfation device of the comparative example ; and.
Desulfation Mode - A special mode of operation designed for sulfated batteries.
More specifically, the desulfation charge mode is illustrated in Fig . 6.
Desulfation Mode Desulfation could take 10 hours.
The indication light 11 is lit on during power supply ( during operation ) of the desulfation device 10.
The desulfation device 10 is used in connection with a battery BT.
Desulfated fucoidan sample 1 ( DSF 1 ) was subjected to 1 hours of desulfation reaction.
If desulfation fails, charging will abort and the CHARGING ( yellow / orange ) LED will flash.
The proposed sequence of 2-O desulfation is shown in FIG 4.
If desulfation fails, the charger will abort and the CHARGING ( yellow ) LED will blink.
Approximately 50 to 70 % of circulating DHEA originates from desulfation of DHEA-S in peripheral tissues.
If desulfation fails, charging will be aborted and the CONNECTED ( red ) LED will remain lit.
EXAMPLE 5 The Example 1 has been repeated with a desulfation temperature equal to 90 °C and a time of 45 min.
