Examples of 'die head' in a sentence
Meaning of "die head"
die head": "A cutting tool used in machining operations, typically in the manufacturing of threaded parts such as bolts or screws. It is used to create the desired thread pattern on a workpiece.
How to use "die head" in a sentence
Basic
Advanced
die head
Move die head to the threading position.
Put dies in proper position in die head.
Die head cover plate screws are loose.
Remove dies from the die head.
Place die head in the use position.
Preferably reduced pressure is applied at or adjacent a die head.
Lay die head on bench with numbers up.
Turn carriage handwheel to back die head off pipe.
Die head not properly aligned with pipe.
Confirm cutting oil flow through the die head.
Adjust die head to give proper size thread.
Check for oil flow through the die head.
Place the die head with numbers facing up.
Burr has occurred at the spline end of the die head.
Die head does not start threading.
See also
Third die head.
Die head not properly set.
Extrusion die head.
The die head shown cuts an outside thread.
The adhesive is applied directly from the die head of an extruder.
The die head and model.
First and second die surfaces are also included on the die head.
Die head and more extruders.
Refer to the respective die head instructions for information on die insertion.
Die head pressure was increased by using different size die heads.
It is then extruded into a die head where it envelops the core component.
The die head defines an extrusion orifice of sinuous form.
The conical end of the core opens into the die head.
Lower the die head into the threading position.
A die chiller may be used to control temperature at the die head itself.
The die head will not touch the sine bar.
Numbers on the dies must correspond with those on the die head slots.
Raise the die head into position up away from the operator.
Turn carriage handwheel to move the die head to the end of the pipe.
Die head with regrindable tangential chasers in self centering holder system.
Check that the correct dies are in the die head and are properly set.
D die head no.
Foaming of the extrudate occurred at the die head due to entrapped water vapor.
The die head subassembly can now be removed from the tool.
Approximately twelve tons of force are developed at the die head during a crimping operation.
The die head adopts high quality steel and the structure is reasonable.
Preferably the tubular body is provided by extrusion or by extruding a material from a die head.
The die head preferably includes at least one straight row of extrusion apertures.
Apply slight force to the handwheel to start the die head onto the pipe.
Whether a good die head or not is directly related to the quality of the products.
A melt pump meters out the molten polymer to a die head having an array of holes.
The die head may be heated to assure a smoother surface of the product extrudate.
Loosen the adjusting nut and lift die head washer foot out of the slot.
Lay the die head down flat on a table or bench with the numbers facing up.
Preferably the lumen experiences the reduced pressure upon exit from an extrusion die head.
You'll also be interested in:
Examples of using Die
Show more
He will want to die when he finds out
To die is what makes life worth living
We thought if we was gonna die we might as well give it a go
Examples of using Head
Show more
It turned my head around about electric cars
The way you hold your head
Only your head will come back
