Examples of 'dielectric losses' in a sentence
Meaning of "dielectric losses"
dielectric losses: In physics, dielectric losses refer to energy losses in a dielectric material when exposed to an electric field
How to use "dielectric losses" in a sentence
Basic
Advanced
dielectric losses
The dielectric losses must be very low.
It could also be used to heat a part by dielectric losses.
With low dielectric losses and high breakdown strength.
The dissipation factor describes the dielectric losses of a capacitor.
Own dielectric losses when the material is placed in a varying electric field.
This effect is caused by variations of dielectric losses of water as a function of temperature.
The sensor may be attached on a sapphire rod having minimum dielectric losses.
This gives rise to large dielectric losses in the insulating sheet.
Such a low amount of polar compounds allows to obtain low dielectric losses.
These liquids have high dielectric losses which have a strong negative impact on the antenna performances.
As the voltage increases the permitivity and the dielectric losses increase.
Dielectric losses of paper are too high to perform HF circuits.
The latter should therefore show only low dielectric losses at hyperfrequencies.
For hyperfrequency applications, it is desirable to use dielectric materials with low dielectric losses.
LC is an anisotropic material with low dielectric losses at these frequencies.
See also
It allows the viscocity to be lowered without any appreciable degradation in the dielectric losses.
This latter contribution to the dielectric losses is a consequence of The charged particles being moved.
Such a low amount of polar compounds allows obtaining low dielectric losses.
A low dissipation factor indicates low dielectric losses and a low concentration of soluble, polar contaminants.
A similar material means a material with a high permittivity and low dielectric losses.
Materials in the electrical field ; dielectric losses and polarization.
High frequency welding is not possible because the material has low dielectric losses.
FIG . 1 is a diagram representing the dielectric losses with respect to the temperature ; and.
High frequency electromagnetic wave heating may also be considered which causes dielectric losses.
The conductance G is linked to the dielectric losses in the material.
We have developed a method to image the temperature-frequency dependence of the dielectric losses.
This has led, in particular, to dielectric losses Ć©valuation.
Advantageously, the second metallisation layer is deposited on a host substrate with low dielectric losses.
Without irradiation, the dielectric losses of the transducer represent 27 %.
The dissipation factor of an oil is a measure of the dielectric losses in that oil.
Advantageously, the resonator elements are made from a material with a high permittivity and low dielectric losses.
Additional energy losses also occur as a result of dielectric losses in the cable insulation.
Advantageously, the structure is made from a material with low dielectric losses.
The silicon substrate of the embedded antennas presents high dielectric losses in the microwave range.
LC is a continuously tunable material with low dielectric losses.
A high-resistivity substrate helped minimise the dielectric losses in the substrate.
Advantageously, the first substrate is made from a material with low dielectric losses.
This material 16 is selected so as to exhibit considerable dielectric losses at the wavelength used.
High-frequency welding is not possible as the material has low dielectric losses.
Therefore, the dominant field effect is that due to dielectric losses and heating.
By for instance using kapton or polyamide, these dielectric losses can be kept low.
Insulation power factor tests are conducted on transformers to measure dielectric losses ( measured in % ).
The tangent delta ( tanĪ“ ) is a measure of the dielectric losses in the cable.
Pu, power dissipated in the specimen by dielectric losses ( unit, watt ).
You'll also be interested in:
Examples of using Dielectric
Show more
I said a dielectric union for connecting pipes
The grinding fl uid was used as the dielectric
Dielectric tape longitudinal applied with overlap
Examples of using Losses
Show more
Gains and losses recognized in comprehensive income
Less profit included in contract losses claim
Losses incurred as a result of temporary psychological injuries
