Examples of 'dielectric strength' in a sentence
Meaning of "dielectric strength"
dielectric strength - This phrase is a term used in physics and engineering to describe the maximum electric field a material can withstand without breaking down
Show more definitions
- The minimum applied electric field that results in the electrical breakdown of a dielectric material.
How to use "dielectric strength" in a sentence
Basic
Advanced
dielectric strength
High dielectric strength due to division structure.
Do not perform a dielectric strength test.
Dielectric strength as regards the envelope.
In such a way the dielectric strength is increased.
Dielectric strength is not a constant value for materials.
Advantages include flexibility and high dielectric strength.
Check the dielectric strength of the oil.
Method of making an insulating body of high dielectric strength.
The dielectric strength is comparable to that offered by askarels.
The strength member may be a dielectric strength member.
The dielectric strength of air increases with pressure.
The bobbin is made of a plastic material of high dielectric strength.
Dielectric strength with increasing thickness.
This thickness was used in the calculation of the dielectric strength.
Dielectric strength between leads.
See also
Superior dielectric strength.
Dielectric strength of body insulation.
These caps are fabricated from high dielectric strength plastic materials.
The dielectric strength functionality is obtained by an increased contact stroke.
There is no series connection necessary for increasing the dielectric strength.
Dielectric strength test.
It is well known that the dielectric strength of matter depends on thickness.
Dielectric strength meter.
It is recommended that they are also periodically checked for dielectric strength.
The dielectric strength of the cylinder was too low to permit poling.
Method for the detection of insufficient dielectric strength of coil insulation.
High dielectric strength of the material is thus obtained when its viscosity is low.
The net result is a reduction in the dielectric strength of the insulation.
The dielectric strength and thermal coefficient of expansion are comparable to that offered by askarels.
Alumina has the highest thermal conductivity and dielectric strength.
In certain applications the dielectric strength of the coating may be of particular importance.
They also have good uniformity and high dielectric strength.
Fluoroketones have a good dielectric strength and better environmental characteristics than sulphur hexafluoride.
Presence of various contaminants significantly reduces the dielectric strength of transformer insulation.
The higher the dielectric strength the smaller the bead size which can be used.
This may result in an excessively low dielectric strength and leakage paths.
The material used to encapsulate electronics should possess a high resistivity and high dielectric strength.
The extensive use is due to its high dielectric strength and average thermal conductivity.
Silicones provide overall electrical insulation because of their high dielectric strength.
The probes in question may also affect the dielectric strength properties of the transformer.
In some applications other materials are added to increase the mechanical and dielectric strength.
The epoxy resin preferably has a high dielectric strength and is therefore a good insulating material.
It is always preferable that the walls of the aperture have a high dielectric strength.
These ions increase the dielectric strength of the gas and hence the arc is extinguished.
The thermosetting material provides the advantage of a good dielectric strength after breaking.
Air has a relatively low dielectric strength and electrical discharge causes catastrophic damage to the device.
That arc produces sparks that disturb the dielectric strength of the switchgear.
Insulating and dielectric strength tests to ensure compliance with the Safety Directive.
Normally a material with a low dielectric constant will have a high dielectric strength.
The dielectric strength of the connector 1 is therefore increased.
You'll also be interested in:
Examples of using Dielectric
Show more
I said a dielectric union for connecting pipes
The grinding fl uid was used as the dielectric
Dielectric tape longitudinal applied with overlap
Examples of using Strength
Show more
Your inner strength should be even stronger
That can only be achieved through strength
We ask for strength to surpass all understanding
