Examples of 'dimms' in a sentence
Meaning of "dimms"
Dimms is a plural noun referring to dim, flickering lights or a slang term for computer memory modules
Show more definitions
- plural of DIMM
How to use "dimms" in a sentence
Basic
Advanced
dimms
Handle the DIMMs carefully at all times.
Memory mirroring with fully buffered DIMMs.
Check both DIMMs for a possible fault.
Unplug the power supply before adding or removing DIMMs.
All DIMMs have integrated temperature sensors.
Optimized mode can support even or odd numbers of DIMMs.
Max DIMMs per memory channel.
This can be implemented at the granularity of DIMMs or logical memory blocks.
Replace DIMMs one at a time to isolate the faulty module.
If different speed DIMMs are.
Odd numbers of DIMMs are not supported in this mode.
Seat up to two DIMMs.
Keep DIMMs in each bank identical in memory size and speed.
Unbuffered and registered DIMMs can not be mixed in the same system.
The DIMMs contain electronic components that can be damaged by static electricity.
See also
Number of DIMMs.
Often DIMMs are located close to a processor which itself generates a significant amount of heat.
Dell recommends that all four memory channels be populated with DIMMs for maximum performance.
DIMMs should be populated by largest capacity first.
A broader future memory expansion roadmap due to the ability to achieve three DIMMs per channel.
DIMMs are mapped in banks of four DIMMs.
Maintain system data integrity and help prevent single bit or multi bit errors on DIMMs.
GB DIMMs are supported only on systems with.
Most Latitude laptops have accessible slots for two memory DIMMs.
DIMMs were introduced to eliminate this disadvantage.
Reseat all of the DIMMs on the indicated FBD channel.
DIMMs must be installed in identical pairs.
Operational memory speed is controlled by CPU type and number of DIMMs installed.
PPD is the method SIMMs and some DIMMs use to identify themselves.
DIMMs come in different heights.
Install identical DIMMs in all four sockets OR.
Figure 4 shows a dual channel configuration using two DIMMs.
Always install DIMMs with the same CAS latency.
For best system peformance, install each bank with four DIMMs.
If different speed DIMMs are used between channels, the slowest.
Memory RAID requires that all DIMMs be populated.
It is required that they be populated by 4 each of the same capacity memory DIMMs.
Dual-rank DIMMs provide the greatest capacity with the existing memory technology.
If the desired memory sized can be achieved, use single ranked DIMMs.
Three DIMMs per channel memory configurations will clock down, regardless of memory rated speed.
In contrast, there are no standards for the space surrounding DIMMs in a computer system.
The final pair of DIMMs serves as the backup pair, while all others are active.
SDDC is supported with x4 based DIMMs in every memory mode.
SO-DIMMs are a smaller alternative to a DIMM, being roughly half the size of regular DIMMs.
DDR3 works best with the number of DIMMs per channel.
Fully-buffered DIMMs are a new standard improving upon the existing DDR2 standard for memory.
Rank sparring requires at least two DIMMs or one quad-ranked DIMM.
DDR2 DIMMs are not backward compatible with DDR DIMMs.
You can only order a max of 3 Dimms in memory with Energystar C.
DDR2 DIMMs are neither forward compatible with DDR3 nor backward compatible with DDR.
