Examples of 'dip-switch' in a sentence
Meaning of "dip-switch"
A dip-switch is a small electronic switch used in computer hardware, typically to select options for the operating mode or settings of a device
How to use "dip-switch" in a sentence
Basic
Advanced
dip-switch
Multiple ranges are selectable via DIP-switch.
Description of DIP-switch setting options.
Input signal and function are chosen via the DIP-switch setting.
Indicates the dip-switch setting memorisation stage.
Various modes of the board can be additionally configured by an on-board DIP-Switch.
Accuracy in all available DIP-switch selectable ranges.
The operating mode and consequent counting direction are selected with DIP-switch 1.
Indicates the dip-switch setting memorisation stage and firmware version.
Refer to the installation diagram to correctly set the dip-switch considering the chosen sensor.
The DIP-switch is equipped with 8 combinations in order to avoid interferences with other control.
Those signals which do not have DIP-switch assigned are always available at the connector.
Identification of device expander w / o power supply expander with power supply DIP-switch position ON.
Ringer volume can be adjusted with a dip-switch located on the PCboard inside the set.
The DIP1 dip-switch allows you to activate or deactivate the code modification function.
The data can be either provided vía a DIP-switch or vía a programmable EEPROM.
See also
Dip-switch settings preset group d.
To solve this problem and obtain a good compensation, put the dip-switch on BIC position.
Dip-switch setting of basic tone.
The Remote feature allows you to view the patch including addresses and dip-switch settings per.
A four-position DIP-switch is used to select various fan on and off delays.
Deselect the permanent boost DIP-switch Rboost.
Easy and fast DIP-switch programming for input and individual output set-up.
Change the CHANNEL or change CODE via DIP-switch.
DIP-switch 2 activates pulse contact of continuous contact.
Setting possibilities with dip-switch.
After testing operation, set dip-switch 4 to ON to switch off the led signals.
The output is coded as a pulse or continuous signal at DIP-switch 2.
When Dip-switch 9 is OFF, the photocells and related leds are only activated during manoeuvring.
These barriers may work on 4 different dip-switch selectable frequencies.
Resetting with a pulse signal or continuous signal is effected with DIP-switch 2.
When DIP-Switch is in Switch Converter mode ( off ), the converter function is same as Switch.
Re-calibration is not needed after changing the DIP-switch range settings.
The DIP-switch 6 has no function.
See illustration 7 for the location of the DIP-switch and the potentiometers.
Changing DIP-switch n 10 on the master has no effect.
The generated coding depends on the position of the DIP-switch no. 4 in the following way.
The DIP-switch assembly has individual switches 81.
User can select 8 different setting by changing he setting of the DIP-Switch to different modes,.
Place DIP-switch 4 “ fine ” to the left position in order to accurately.
To eliminate the safety system control, position dip-switch 6 to OFF.
Since the DIP-switch has 8 switches, the circuit can produce gain values having 256 gradations.
To enable / disable the LED indicator, please refer to the appropriate dip-switch configuration shown below.
The easy DIP-switch set-up allows for more than 1000 diff erent pre-calibrated temperature range combinations.
The Start impulse in the opening phase has no effect when Dip-switch 3 is ON.
DIP-switches corresponds to a certain DMX-value DIP-switch.
That memory element is for example formed by a DIP-switch ( Dual In line Package ).
Set DIP-switch 9 to OFF and DIP-switch 10 to ON in order to determine the Master device.
Setting the DMX-starting address, DIP-switch no.
DIP-Switch F to change the settings described under „ DIP-Switch settings ”.
The value 10 corresponds to full range set with Dip-Switch.
