Examples of 'disc guard' in a sentence
Meaning of "disc guard"
Disc guard typically refers to a protective covering or device used to shield magnetic discs or optical discs from damage or wear. It can be a physical part of a storage or disc-playing device, or a separate accessory designed to be attached or used with discs, such as a case or cover
How to use "disc guard" in a sentence
Basic
Advanced
disc guard
Rotate the disc guard to the desired position.
Adjust the position of the disc guard accordingly.
Rotate the disc guard until the opening is at the.
No lubricant is needed for the rotating disc guard.
Adjust the position of the disc guard on the machine correctly.
The three holes in the rotating disc guard.
The disc guard must not be removed from the tool.
Reattach the machine table and the sanding disc guard.
This prevents the disc guard from contacting the disc.
Never use the tool without the disc guard fitted.
The disc guard cover must be securely attached to the angle grinder.
Never sand with the sanding disc guard not in place.
The disc guard must be fitted at all times when the tool is in use.
Always use the angle grinder with the disc guard cover in place.
The disc guard must always be fitted while the diamond cutter is in use.
See also
Press the release button and rotate the disc guard into the desired position.
Position disc guard against the lower one-third of the.
Always switch off the tool before fitting the disc guard or adjusting the guard to a.
Ensure that the disc guard cover 7 sits firmly on the spindle collar.
The machine is equipped with a bayonet-type quick-release adjustment device for the disc guard.
Press the release button and rotate the disc guard until the two triangular marks on.
Turn the disc guard cover 5 into the desired position working position.
Close the clamping lever 8 to firmly clamp the disc guard cover 7 in place.
The adjustable disc guard cover 5 must always be in place when working with.
The closed side of the disc guard cover 5 must always be facing the operator.
The disc guard cover has 5 set positions.
The closed side of the disc guard 7 must always be positioned towards on the operator.
You'll also be interested in:
Examples of using Disc
Show more
Failed to play the disc is incorrectly inserted
The disc is rotating but no picture is produced
A poorly manufactured disc may not be playable
Examples of using Guard
Show more
Lift both guard barriers to their up locked po
It says there is an armed guard in the hull
Guard protects hand from the blades
