Examples of 'disc should' in a sentence
Meaning of "disc should"
disc should: Refers to the expected behavior, features, or performance of a disc, such as a compact disc (CD) or digital versatile disc (DVD)
How to use "disc should" in a sentence
Basic
Advanced
disc should
No disc should be in the product when you.
Total number of files on the disc should be.
The disc should remove cleanly.
The following types of disc should not be used.
The disc should be placed with the labelled surface up.
Keep in mind that the disc should be clean and dry.
The disc should have come with the card.
Writing with pointed articles on the disc should be strictly avoided.
The disc should be finalized.
In this case also a cold start of the disc should be executed.
The sanding disc should contact approximately one inch of work surface.
The distance between the pads and the disc should be minimal.
The sanding disc should always sand the workpiece from up to down.
Clean the disc ; damaged disc should be replaced.
The disc should be fastened in conventional manner to the spindle of a machine tool.
See also
The rest of the disc should slip in by itself.
No disc should be in the product when you upgrade the software by Online.
To prevent risks, the disc should ideally be replaced.
The disc should fit securely in the groove and rotate freely on the pad.
According to him, further release of the disc should be prohibited.
Exercises for a bulging disc should focus on strengthening the surrounding muscles.
Further, the track pitch of the optical disc should be reduced.
The grinding disc should be mounted in accordance with the instructions in the product manual.
Total number of files and folders on the disc should be less than 650.
The jug with the frothing disc should be cooled down completely before you disassemble it.
Dirty or scratched disc . - Clean the disc ; damaged disc should be.
The grinding disc should be placed onto the Angle Grinder with the writing facing upwards.
Once you hear a click, the S-blade or whipping disc should come out with ease.
The disc should eject whether the vehicle ignition is ON or OFF.
You know, finding who sent this disc should make Castle feel a whole lot better.
The disc should still move freely - do not overtighten.
The total number of files on the disc should be less than 650.
The skin disc should be fully submerged in the MgSO4 solution.
If the gearbox works, my disc should spin at a fraction of the speed.
The disc should be slightly smaller than the width of the foot:.
If playback of a special disc should cause trouble, contact the seller of the disc.
To begin, the disc should be thrown straight to the dog at a short distance.
What kind of disc should I use for recording?
The sanding disc should contact approximately one inch ( 25mm ) of work surface.
In most cases, the disc should play just like a commercial audio CD.
In this case, the disc should be closed / finalized.
Therefore, the burst disc should be tested to 5/3 the working pressure of the cylinder.
You'll also be interested in:
Examples of using Disc
Show more
Failed to play the disc is incorrectly inserted
The disc is rotating but no picture is produced
A poorly manufactured disc may not be playable
