Examples of 'disc surface' in a sentence
Meaning of "disc surface"
disc surface: This phrase refers to the area on the surface of a disc, such as a CD, DVD, or vinyl record. It is commonly used in technology, music, and data storage contexts
How to use "disc surface" in a sentence
Basic
Advanced
disc surface
Check that the disc surface is clean.
The data are written in a spiral on the disc surface.
Do not wipe the disc surface using circular strokes.
Do not stick it on any other disc surface.
Do not wipe the disc surface with circular strokes.
Avoid putting loads onto the disc surface.
Do not wipe the disc surface using circular motions.
Do not affix gummed labels or tape to the disc surface.
Always keep the disc surface clean.
Cleaning fluids will permanently damage the disc surface.
Make sure that the disc surface is clean.
The image shows the possible states of the brake disc surface.
Condensation will form on the disc surface if it is brought into a.
These ramps press the main body against the disc surface.
Do not touch the disc surface the side with no printing.
See also
The mold closes with a metal stamper in contact with the disc surface.
Heat transfer through the disc surface is possible.
The direction of the flux field is either parallel or perpendicular to the disc surface.
Do not apply the entire disc surface to the surface of the material.
There is usually a reduction of the small blood vessels crossing the disc surface.
Colours printed onto the disc surface are now as rich and deep as the original.
Further, the powder material is shown to be directed generally perpendicular to the disc surface.
These variations in the disc surface are usually the result of extensive vehicle road usage.
Carefully wipe off the water droplets from the disc surface before using the disc.
Audio on, the disc surface is probably scratched.
Hold discs by the edges; do not touch the disc surface with your fingers.
Wipe the disc surface with a clean, cry cloth.
Sound vibrations, especially from a subwoofer, can interfere with the laser reading a disc surface.
Finger prints and dust on the disc surface can affect the sound and picture quality.
Consequently, the friction surfaces T1 of each button also remain parallel to the disc surface.
Make sure the DVD disc surface is not damaged.
The disc surface is reduced for 200 seconds at -1 volt against saturated calomel electrode.
The VideoGard protective coating on the disc surface makes it 40 times more resistant to damage.
Keep the disc surface clean and free from dirt, dust, fingerprints and scratches.
C1 Unevenness of the disc surface is permissible.
Keep the disc surface clean and free from dirt, dust, fi ngerprints and scratches.
Measuring Method Prior to each test, the disc surface must be cleaned with alcohol.
Clean the disc surface with a soft, dry cleaning cloch.
The brake lining 54 is adapted to frictionally engage the planar radial disc surface 22A.
Clean the disc surface with a soft, dry cleaning cloth.
Fig . 6 shows diagrammatically a disc surface subdivided into annular regions.
The rotor disc surface under the brake 21 can be provided with a separate braking surface.
C1-Unevenness of the disc surface is permissible.
Wipe the disc surface gently, radially, from center toward the outer edge.
Do not touch the disc surface when handling a disc ; hold it by the edges.
The holes on the brake disc surface ensure high grip and efficient, prompt response.
Make sure the DVD disc surface is not damaged no scratches, fingerprints etc.
Wipe the disc surface gentely, radically, from center.
Check that the disc surface is clean, If not, try cleaning it.
You'll also be interested in:
Examples of using Disc
Show more
Failed to play the disc is incorrectly inserted
The disc is rotating but no picture is produced
A poorly manufactured disc may not be playable
Examples of using Surface
Show more
An uneven surface increases the risk of overturning
Where ϑ is the measured test surface temperature
All feasible surface and subsurface ECVs
