Examples of 'diseqc' in a sentence
Meaning of "diseqc"
The term 'diseqc' is not a commonly used English word and does not have a specific definition in English
How to use "diseqc" in a sentence
Basic
Advanced
diseqc
This technology requires bidirectional DiSEqC capabilities.
The DiSEqC components are addressed differently according to their function.
If you are using a motorized positioner with DiSEqC.
In the simplest version of DiSEqC is used between two universal LNBs switch to.
The problem is control of the DiSEqC.
The DiSEqC protocol has been extended to encompass commands for steering dish rotors.
The following instruction describes how to use the DiSEqC.
DiSEqC programs appear classified in categories or folders.
You must set your receiver up so that it is ready to use DiSEqC.
The concept of DiSEqC is a protective trademark of EUTELSAT.
You can use a special antenna switch with DiSEqC commands.
This indicates the DiSEqC function of the receiver is turn ON.
Receiver with DiSEqC.
Select the proper DiSEqC port and then press OK.
By every satellite you select it you will need to set DiSEqC settings.
See also
DiSEqC controlled motor for satellite dish.
The RF connector allows controlling an antenna using DiSEqC commands.
All my DiSEqC switches from SPAUN.
Connect one end of a Coaxial cable to the RF output connector of the DiSEqC switch.
This is handled by the receiver using the DiSEqC protocol to control the LNB mode.
The option DiSEqC Input Selection should now be disabled.
The parameter SRC is optional in case a DiSEqC Switch or a Monoblock LNB is used.
DiSEqC Mode only available for satellite band.
Now, the receiver is ready with DiSEqC function.
Select the DiSEqC mode for the selected LNB.
Displays on-screen message for antenna movement using DiSEqC positioner.
Highlight the option DiSEqC Command Mode and using the buttons change this to Installer.
If you satellite is controlled by a motor, select the desired DiSEqC version with.
The DiSEqC Switch.
You now have two ways to make the settings, either via a DiSEqC.
After selecting DiSEqC switch, another menu screen will be displayed.
The method of claim 1, wherein the control signal conforms to the DiSEqC standard.
The DiSEqC protocol is implemented in hardware, which provides a more reliable demodulation and improved robustness.
If you have multiple satellite dishes and a DiSEqC switch, select this antenna type.
Depending upon the UART, an inverter may be used to produce a correct DiSEqC signal.
DiSEqC relies only upon a coaxial cable to transmit both bidirectional data / signals and power.
Alternatively, the UART can be programmed to generate a DiSEqC signal directly.
If you select a DiSEqC option, Search Type screen will be displayed.
F connectors attached to a 4-way DiSEqC switch.
Least two dish LNB by DiSEqC Switch, you can also connect to HH mount.
DISEQC SWITCH, Select this antenna type if you have multiple satellite antennas and a DiSEqC switch.
A number of variations of DiSEqC exist,.
Following the DiSEqC signal, a so-called ToneBurst is output.
It then sends the angular position to the positioner using the DiSEqC 1.2 protocol.
You can set four DiSEqC options ( if available ) on the next screen.
Use the buttons / and / select the menu item DiSEqC Search.
Also for the DiSEqC master ( the receiver ) different DiSEqC levels are defined,.
Select the type of mount used, DiSEqC switch, monoblock head.
With DiSEqC 1.2, the user must manually operate the dish to locate satellites one by one.
When Motor Antenna is selected then set DiSEqC 1.2 or USALS in Antenna.
