Examples of 'display backlight' in a sentence
Meaning of "display backlight"
display backlight - A display backlight is a source of illumination used in electronic display devices, such as LCD screens, to provide visibility and clarity. It is positioned behind the display panel to enhance the visibility of images and content
How to use "display backlight" in a sentence
Basic
Advanced
display backlight
The display backlight of the transmitter is activated.
Press and hold to activate display backlight.
The display backlight stops blinking.
Configure the brightness of the display backlight.
The display backlight is normally off.
How to adjust the display backlight.
The display backlight flashes while flaps are closing.
Used to set the intensity of the display backlight.
The display backlight flashes every few seconds.
Press the button again to turn off the display backlight.
The display backlight automatically turns off after a period of inactivity.
The user can adjust the brightness of the display backlight.
The display backlight and control lamp will turn off.
Press this button to turn on the display backlight on the indoor unit.
The message display backlight and lights turn off to minimize power consumption.
See also
Use this to set the duration of the display backlight and keypad.
Switch off the display backlight when the device is in standby mode.
Choose this menu item for setting the brightness of the display backlight.
The display backlight has eight levels including off and can be set.
Sets the delay time before the display backlight is turned off.
The display backlight can be of any wavelength in the visible region of the spectrum.
Choose this menu item for setting the color of the display backlight.
The display backlight on a keypad is normally programmed to turn off after approximately one minute.
A single button on the right side of the thermostat activates the display backlight.
The display backlight is set to on when BACKLIGHT is pushed.
Press the MARK button to turn the display backlight on.
The display backlight is off when AC power is disconnected.
Backlight Adjust how long the display backlight stays on.
The LED display backlight also turns on while pushing or turning the setting knob.
Backlight settings Here you can set how the display backlight behaves when using iGO.
The display backlight can be adjusted in 3 different levels.
PUSH MARK to turn on the display backlight at anytime.
Display backlight adjustable in 7 different colors.
Set the time for the display backlight via the menu item Light T.
When working in dark environments, use the display backlight.
Short pressure, display backlight command.
Display backlight will turn off when idle for 5 mins automatically.
Light Sensor Automatically adjusts display backlight brightness.
During use, the display backlight will dim down to low setting automatically after about.
Set a shorter time for display backlight 6.
On, The display backlight will always be on at full bright.
Setting the level of the display backlight 1.
If the display backlight is activated, the LIGHT icon appears on the display.
You can enable or disable the radio 's display backlight as needed.
Dimmed, The display backlight will always be on at reduced brightness exception, standby mode.
When the device is switched on, the display backlight turns on as well.
Note, By pressing any button on the panel automatically switching on the display backlight.
In standby mode, the radio and display backlight will be turned off.
The LCD display backlight will automatically turn off after 10 seconds in order to save energy.
After a few seconds of overrun time, the display backlight turns off.
You'll also be interested in:
Examples of using Display
Show more
You must never display signs of weakness
Display the drawing and annotation tools
Select the data to display on that line
Examples of using Backlight
Show more
The backlight of the display can be adjusted
Press to turn the backlight on and off
The backlight of the control panel is blue
