Examples of 'display blinks' in a sentence
Meaning of "display blinks"
When referring to a display, 'display blinks' means that the screen or monitor is rapidly and intermittently turning on and off, resulting in a blinking effect. This can be caused by technical issues, such as a loose connection or a malfunctioning component. In a broader context, 'display blinks' can also be used metaphorically to describe a situation or action that is inconsistent or unstable
How to use "display blinks" in a sentence
Basic
Advanced
display blinks
On the timer display blinks statement minutes.
During this function the display blinks.
Display blinks or fan moves slightly when humidifier is plugged in.
The special holiday display blinks at the day of.
Display blinks or fan moves slightly when humidifi er is plugged in.
On the minute counter display blinks statement minutes.
At the moment of the first ignition the display blinks.
The cooking zone display blinks and turns off.
The minute indicator of the time display blinks.
The display blinks to indicate that the time has been set.
The last number in the time display blinks.
The time display blinks and you can alter the time.
The horn sounds and the process status display blinks.
The control lamp of power in the display blinks and an acoustic signal sounds.
When the battery is being charged the battery symbol on the display blinks.
See also
The first digit of the display blinks and allows the title input.
Cleaning cartridge contains not enough cleaning fluid display blinks red.
The symbol on the display blinks if the call is not read or not answered.
Playback stops at the current position and the time display blinks.
The display blinks showing the time remaining before the end of the cycle.
During the video recording the operating display blinks green and red.
In the display blinks indicator 1 for the programme location.
When the time is over there is a sound signal and the timer display blinks.
On the display blinks program location 1, for the title that is to be played first.
When you have older electronic units the display blinks rapidly for some seconds.
Press on both + and - buttons together for a few seconds until the display blinks.
After about 2 seconds the display blinks and the set value for light time appears.
TIMER lamp on the indoor unit display blinks.
If the OL display blinks during normal operation, this indicates an overload danger.
Select the function with the ENTER button the display blinks.
The display blinks a 1 when not in sync.
On the input screen, the entire display blinks.
Note, the display blinks when the unit is in DMX-mode and no DMX-signal is detected.
When switching off, the backlight of the display blinks.
In this case, the display blinks at a 1 Hz frequency.
The horn sounds / the process status display blinks when.
The display blinks if the temperature is less than 8 C or 39 C or more.
When no iPod is docked, the iPod indicator on the display blinks.
The display blinks with „ 1 “ as the default speed.
When the time is over, a signal sounds and the timer display blinks.
The « Enter water amount » display blinks.
Info, Once the desired air humidity is reached, the appliance stops and the display blinks.
The » SO « symbol in the display blinks.
To return to RUN, press and hold PROG until colon in the display blinks.
If a timer is running when Sabbath Mode attempts to start, the display blinks the message.
Press again more than 2 seconds, time display blinks.
When using the device for the first time, the time display blinks “.
Press the SET button once to enter the set mode “ SET ” on display blinks.
If the pressure in testing mode exceeds 320 mmHg, the display blinks.
After 20 minutes in cleaning mode, the appliance stops and the « Clean Mode » display blinks.
You'll also be interested in:
Examples of using Blinks
Show more
Blinks red when an abnormal voltage is present
The symbol blinks on the base unit
Blinks when an unsupported audio format is detected
Examples of using Display
Show more
You must never display signs of weakness
Display the drawing and annotation tools
Select the data to display on that line
