Examples of 'display switches' in a sentence
Meaning of "display switches"
Display switches typically refer to buttons, controls, or mechanisms on electronic devices that allow users to change or control the information displayed on a screen. These switches can be physical buttons, touch-sensitive controls, or software-based options that enable users to navigate through various display settings
How to use "display switches" in a sentence
Basic
Advanced
display switches
The display switches to the main menu.
Display when the display switches over.
The display switches to the minute display.
The indicator in the display switches off.
The display switches to the setpoint value.
Press the button until the display switches off.
The display switches to the menu level.
The setting is saved and the display switches to standby mode.
Display switches on when button is pressed.
The temperature display switches over and.
The display switches to the character input screen.
The changes are stored and the display switches to the phone number.
The display switches to the voice control screen.
The service menu is exited and the display switches to the standby mode.
The display switches to entry of the call number.
See also
The bar stops flashing and the display switches back to the time display.
The display switches to the templates.
Your settings are saved automatically and the display switches to the next highest menu level.
Display switches between and counted time minutes.
Each segment must be hit three times before the display switches to the next segment.
The graphics display switches to performance mode.
Confirm the selection with the confirmation key The Descale display switches off.
The display switches into the country selection screen.
Press the OFF button or wait until the display switches over to the temperature setting.
The display switches back to normal mode after approx.
After one minute, the display switches off.
The display switches off automatically after a set period of inactivity.
If there is noise transmission, the display switches on automatically.
The display switches on and shows the current cooling temperature.
As soon as a button is pressed, the display switches on again.
Display switches on automatically when the knob is moved or a button is pressed.
After a while the display switches to the stand-by mode.
Display switches on after pressing the button or turning the rotary button.
After 1 second the display switches back to display mode.
Display switches automatically from the depthmeter display to the time display and the second.
After 3 seconds the display switches back to the clock display.
As soon as one of the four buttons is pressed, the display switches on again.
The measured value display switches to the current pressure value.
When the TIME button is pressed, the time display switches.
The display switches on and the date and time appear.
If you enter an incorrect code, the display switches back to normal immediately.
The display switches itself off automatically when the synchronisation commences.
Each time the button is pressed, the display switches as shown below.
The capacity display switches off automatically after a few seconds.
When someone calls at the door, the display switches on without a bell.
Then the display switches and the humiditiy of the room is shown.
Depending on the previous setting, the display switches to the other temperature unit.
The display switches backwards and forwards between the two channels.
After the last bar, the display switches back to the fi rst bar.
The display switches off when the cooking zone has cooled sufficiently.
You'll also be interested in:
Examples of using Display
Show more
You must never display signs of weakness
Display the drawing and annotation tools
Select the data to display on that line
Examples of using Switches
Show more
It switches off as soon as the tap is closed
Turn off all switches on the unit
Switches shuffle mode in the following order
