Examples of 'do not fully tighten' in a sentence
Meaning of "do not fully tighten"
Do not fully tighten: This phrase is often used in the context of assembling or fastening objects. It advises against completely securing or tightening something, likely to allow for adjustments or prevent damage
How to use "do not fully tighten" in a sentence
Basic
Advanced
do not fully tighten
Do not fully tighten until next step.
Using a suitable screwdriver fit the screws, but do not fully tighten.
Do not fully tighten fasteners until prompted.
Install screws from parts-included bag into handle bottom / top flange but do not fully tighten.
Do not fully tighten bolts at this time.
With a Philips screwdriver, thread both screws into the posts but do not fully tighten.
Do not fully tighten the screw yet.
Assemble mincer attachment in the indicated sequence ( Fig . A ) . Do not fully tighten threaded ring.
Do not fully tighten fasteners until instructed to do so.
Do not fully tighten the screws at this point.
Do not fully tighten the servo mount screws.
Do not fully tighten the bolts.
Do not fully tighten this screw in this step.
Do not fully tighten the screws.
Do not fully tighten the hardware until instructed to do so.
See also
Do not fully tighten screw until end of this step.
Do not fully tighten the strain relief at this stage.
Do not fully tighten the spacer mounting screws at this time.
Do not fully tighten the screws in the bearing blocks at this time.
Do not fully tighten the mounting hardware before aiming see below.
Do not fully tighten blade screws until each screw has been started.
Do not fully tighten the nut when there is no bit or accessory installed.
Do not fully tighten the front vice to allow the workpiece to be moved.
Do not fully tighten the bolts on the assembly until mantel is completed.
Do not fully tighten the lug nuts until the wheel has been lowered.
Do not fully tighten one thermocouple before having started to tighten the second one.
Do not fully tighten screws until Step 6 is complete.
Do not fully tighten the fasteners at this point Figure 4.
Note, Do not fully tighten smoker box bracket screws at this time.
Do not fully tighten bolts until step 6.
Do not fully tighten all bolts until all parts are in place .!
Do not fully tighten screws until the Target Clip is installed ( Step 5 ) NOTE.
You'll also be interested in:
Examples of using Fully
Show more
Neither side fully respected the agreement
Fully clean the parts with water
The batteries should be fully recharged afterwards
Examples of using Do
Show more
Do not use abrasive cleansers or scouring pads
Maybe you did not do so badly after all
Do not let them touch sides of pan
Examples of using Not
Show more
I am not really sure what that thing was
Use where walls are not perpendicular to base
I am not saying that you do not care
Examples of using Tighten
Show more
Tighten the screw through the clips
I will just tighten these up for you
Tighten properly the connection block screws
