Examples of 'do not over tighten' in a sentence
Meaning of "do not over tighten"
The phrase 'do not over tighten' is a cautionary statement that advises against tightening something excessively. It suggests that there is a risk of damaging or impairing the object if it is tightened too much. It is commonly used when dealing with screws, bolts, or other fasteners
How to use "do not over tighten" in a sentence
Basic
Advanced
do not over tighten
Do not over tighten or removal will be difficult.
Apply firm pressure but do not over tighten.
Do not over tighten the top screw.
Check and tighten all bolts do not over tighten.
Do not over tighten the compression nut.
The valve stem should still move freely do not over tighten.
Do not over tighten to prevent stripping of threads.
Tighten the mounting screws until they are equally compressed do not over tighten.
Do not over tighten the retaining knobs.
Replace the Cap on the Tank FIRMLY but do not over tighten.
Do not over tighten the tine bolt.
Be careful to tighten, but do not over tighten.
Do not over tighten the strap lock.
Cap to be hand tight, do not over tighten.
Do not over tighten the locking knob.
See also
Be sure the bolts are tight, but do not over tighten.
Do not over tighten pipe connection to regulator.
Make sure the installation is fi rm, but do not over tighten the nuts.
Do not over tighten the fluid tip.
Properly tighten the hose to the inlet fitting, but do not over tighten.
Do not over tighten spindle nut.
Tighten the bolt until snug, but do not over tighten to the point of binding.
Do not over tighten metal screws in plastic parts.
Straps need further adjustment after ambulation . Do not over tighten.
Do not over tighten the screws.
Tighten the jam nut snugly by hand . Do not over tighten the nut.
Do not over tighten orifice hoods.
For a plastic fi tting, hand-tighten the nut and do not over tighten.
Do not over tighten wheel nut.
Re-install the light support panel . Do not over tighten screws.
Do not over tighten the connections.
Careful, careful . Do not over tighten.
Do not over tighten the hex head screw.
Warning do not over tighten screws.
Do not over tighten the clamp.
Important, Do not over tighten the screws.
Do not over tighten the ties.
Tighten the knob . Do not over tighten or use tools to do this.
Do not over tighten threaded parts.
IMPORTANT, Do not over tighten the screw.
Do not over tighten the connector.
Caution, do not over tighten screws.
Do not over tighten spindle bolt.
CAUTION, Do not over tighten the screw.
Do not over tighten by forcing it to turn.
Warning, Do not over tighten the hex head bolt.
Do not over tighten the bit.
Caution, Do not over tighten so that the foot material collapses.
Do not over tighten the spark plug when installing.
Note, Do not over tighten set screw.
You'll also be interested in:
Examples of using Do
Show more
Do not use abrasive cleansers or scouring pads
Maybe you did not do so badly after all
Do not let them touch sides of pan
Examples of using Not
Show more
I am not really sure what that thing was
Use where walls are not perpendicular to base
I am not saying that you do not care
Examples of using Tighten
Show more
Tighten the screw through the clips
I will just tighten these up for you
Tighten properly the connection block screws
