Examples of 'do not tighten' in a sentence
Meaning of "do not tighten"
The phrase 'do not tighten' is a warning or instruction to not fasten or secure something too tightly. It is often used when assembling or working on mechanical or electrical components, to prevent damaging or over-tightening them
How to use "do not tighten" in a sentence
Basic
Advanced
do not tighten
Do not tighten the screws firmly yet.
Tighten the front screws do not tighten firmly.
Do not tighten the mounting device excessively.
Tighten the rear screws do not tighten firmly.
Do not tighten more than finger tight.
It will give you a hand but do not tighten.
Do not tighten the nut at this time.
Also wear shorts that do not tighten too much.
Do not tighten it all the way yet.
Tighten both screws carefully and do not tighten too much to.
Do not tighten shoulder straps at this time.
Screw the clamping nut onto the spindle but do not tighten it.
Do not tighten the crank cap excessively.
Thread the collet nut onto the spindle but do not tighten it yet.
Do not tighten flare nuts too tight.
See also
Secure the pole section to the base but do not tighten the screw.
Do not tighten the screws at this stage.
Secure the second section to the pole but do not tighten the screw.
Do not tighten the banjo bolt yet.
Insert the oil filling plug again into the opening do not tighten.
Do not tighten sticking nut any further.
Install just one screw on each hinge but do not tighten them yet.
Do not tighten down the screws completely.
Mount the universal mounting bracket in the right position do not tighten the screws.
Do not tighten the screws too much.
Secure them on the opposite side with a self locking nut do not tighten it yet.
Do not tighten any further at this point.
Replace the screws in the upper hinge bracket but do not tighten all the way.
Do not tighten the tension nut completely.
Install nuts to retain bolts, do not tighten.
Do not tighten the belts too firmly.
Install screws in each hole, but do not tighten.
Do not tighten vice excessively to prevent crushing.
Tool for storage, do not tighten the collet nut.
Do not tighten too much at this point.
To prevent damage to tool, do not tighten collet without a bit.
Do not tighten anchoring screws too tightly.
Screw the nuts on the hanger bolts, but do not tighten.
Do not tighten set screws until indicated.
Snug the nuts up, but do not tighten them all the way.
Do not tighten until the handle is adjusted.
At this stage of the assembly, do not tighten the bearing block screws.
Do not tighten the nuts at this time.
Install screws from parts-included bag but do not tighten fully.
Do not tighten it too tightly at this stage.
When securing the handle, do not tighten the screw more than is neccesary.
Do not tighten this ring too much.
Tighten screws to hold ring and dome securely, do not tighten screws completely.
Do not tighten them as you thread them in.
Use medium-strength threadlocker varnish and do not tighten the screws firmly yet.
You'll also be interested in:
Examples of using Do
Show more
Do not use abrasive cleansers or scouring pads
Maybe you did not do so badly after all
Do not let them touch sides of pan
Examples of using Not
Show more
I am not really sure what that thing was
Use where walls are not perpendicular to base
I am not saying that you do not care
Examples of using Tighten
Show more
Tighten the screw through the clips
I will just tighten these up for you
Tighten properly the connection block screws
