Examples of 'dowel pin' in a sentence
Meaning of "dowel pin"
A dowel pin is a solid cylindrical rod that is used to align and join components in machinery or furniture
How to use "dowel pin" in a sentence
Basic
Advanced
dowel pin
A dowel pin was inserted through the loop.
Retain bolts and dowel pin for reassembly.
Radially position the open side of the dowel pin.
Remove the dowel pin on the pump shaft.
In this figure the pin is a headed pin or a headed dowel pin.
Install the dowel pin to connect the yoke to the piston.
Install the yoke screw and washer to secure the dowel pin.
Dowel pin metric.
Line up the three screw holes and dowel pin hole on the.
The dowel pin is preferably provided with at least one chamfered side wall.
A plastic ratchet fastener is used to contain the dowel pin in the wrench head.
Install the dowel pin on the pump shaft and loosely assemble the shaft coupling.
The mechanical stop may comprise a finite length rod element or dowel pin.
A dowel pin may be used to help assure the position of the Hall effect sensors.
RIFFEL spruce wood dowel pin.
See also
To gain maximum results in dowel pin installations, the following is recommended.
The apparatus according to claim 8 wherein the first connector comprises a dowel pin.
One aspect of my invention is a one-piece dowel pin as set out in appended claim 1.
However, FRP dowel pin connectors are inserted normal to the layers.
Using a pliers, pull the dowel pin out.
Dowel pin 70 is preferably made of stainless steel.
The projecting pin 60 can comprise a dowel pin or bolt or shaft.
A mating dowel pin should be used (see illustration below).
The crank shaft 2 is secured to the shaft 1 by the use of dowel pin.
The rotatable dowel pin 106b includes an eccentric end, the use of which will be described.
Push the rubber grommet ( A ) onto the end of the dowel pin as shown.
Insert the dowel pin ( 6 ) through the tool frame, contact trip guide and trigger assembly.
Secure the rotor yoke by pressing the 3 Ø x 28 mm dowel pin into place.
Insert the dowel pin ( B ) through the tool frame and trigger assembly as shown.
Align the holes of the trigger with the housing holes ( E ), then insert the dowel pin B.
Dowel pin / screw plug / allen key bolts.
Align the holes of the trigger with the housing holes ( D ), then insert the dowel pin B.
The second dowel pin 88 may be a tapered pin.
Remove rubber grommet ( A ) from the end of the dowel pin B.
The first dowel pin 87 may be a tapered pin.
Push the rubber grommet ( 5 ) onto the end of the dowel pin.
A dowel pin 20 may be provided with the clamp assembly 1.
Tie rod, dowel pin.
The first dowel pin 87 disposed lower than the second dowel pin 88.
A medium-tight connection will be created by placing a dowel pin 32 in contact with a counter pin 36.
Optionally, the dowel pin 92 may be substantially centered between the sides of the plate 80.
Pin 558 can be a threaded stud or can be a dowel pin having any cross-section.
The diameter of the dowel pin 114 is greater than the thickness of the side wall 22.
Check that the relief valve is closed turn centre-grooved dowel pin pos . 20 clockwise.
The dowel pin penetrates the other guidance component, 69a, which has an adequate hole.
The actuator attachment assembly 52 includes a dowel pin 92 extending from the bottom of the plate 80.
The second dowel pin 88 is fitted into the second communication port 78 and the second passage 94.
A position spring 66 and a dowel pin 68 secure the suction valves 64 to the valve plate gasket.
