Examples of 'drain fitting' in a sentence
Meaning of "drain fitting"
The phrase 'drain fitting' is commonly used in plumbing or construction contexts. It refers to a device or component used to connect a drain pipe to a fixture or drainage system, ensuring proper drainage and preventing leaks or blockages
How to use "drain fitting" in a sentence
Basic
Advanced
drain fitting
Remove threaded plug from drain fitting.
Integrated drain fitting to ease installation.
Reattach the drain hose to the drain fitting.
Drain fitting for dehumidifier mode.
Cut barbs from drain fitting.
Drain fitting with rubber stopper.
Connect drain tubing to drain fitting.
Remove the drain fitting and priming plug.
Disconnect the drain tube from the bin drain fitting.
The drain fitting uses a standard garden hose connector.
Connect the plastic tube to the drain fitting located under the unit.
Open drain fitting and tilt compressor to empty accumulated water.
Connect the drain insert to the drain fitting underneath the right rear.
Unscrew the cap on the back of the unit to access the drain fitting.
Connect the drain hose to the drain fitting under the front of the machine.
See also
Install the drain hose to a " WYE " drain fitting.
Connect the drain fitting with a plastic tube to an open trapped and vented drain.
Install the drain insert into the drain fitting underneath the base.
Open drain fitting and tilt compressor to empty accumulated water . Fig . 6.
Ensure that the drainpipe exit is lower than the drain fitting in the unit.
There is a single ¾ ” FPT drain fitting in the back of the cabinet.
OPEN air release valve and drain fitting.
Step 7 - Screw in the drain fitting and tighten until snug.
A drain fitting 27 extends through a medial portion of the bottom wall 26.
Disconnect the drain hose from the drain fitting on the bottom of the humidifier housing.
Use the provided drain hose ( 20 ′ length included ) to attach to the valve drain fitting.
DO NOT pull the oil drain fitting off the engine.
Install the Poresta Fix drain fitting.
To avoid this, use the condensation drain fitting kit as indicated in the relative section.
Step 9 - Route the drain hose to the drain fitting assembly.
FIG . 13 is a close-up view of a drain fitting inserted in a receptacle of the drain pan.
Thread the drain hose ( not included ) onto the drain fitting on the dehumidifier.
Thread the drain hose ( not included ) onto the drain fitting on the air conditioner.
Do not install the drain insert into the drain fitting during the “ empty milk ” cycle.
Then simply insert the tube into the drain fitting as shown in Fig 3.
Connect a 1/2 in . drain tube to the humidifier drain fitting and run to a suitable drain.
Air cooled models have a single ¾ ” FPT drain fitting in the back of the cabinet.
Push in and rotate the oil drain fitting 1/4 turn.
You'll also be interested in:
Examples of using Fitting
Show more
More fitting for a star like you
Attach quick connect fitting to garden hose
Fitting the cable plug to the motor
Examples of using Drain
Show more
Leave it to drain on the half moon insert
The washing machine does not drain or spin
There is a drain pump in the ice machine
