Examples of 'drawing operation' in a sentence
Meaning of "drawing operation"
drawing operation: The phrase 'drawing operation' can refer to a process or procedure involving the act of creating illustrations, diagrams, or designs, often as part of a planned or systematic artistic, technical, or organizational activity
How to use "drawing operation" in a sentence
Basic
Advanced
drawing operation
The cold drawing operation was accomplished effortlessly.
The part is shaped by a drawing operation.
The impact drawing operation thus enables numerous possibilities to be obtained.
The piston is preferably manufactured by a metal drawing operation.
At the end of the drawing operation the tube will not.
It is the best equipment for a safe and auditable drawing operation.
The fiber drawing operation proper is that of drawing the preform.
Either a one or two stage drawing operation may be used.
A wire which is initially harder will remain so throughout the drawing operation.
This type of steel is suitable for drawing operation except severe drawing.
The skirt is provided on the shadow mask sheet by means of a drawing operation.
Carrying out the drawing operation after reheating the bar to softening.
This solution acts as a lubricant to reduce friction while cold drawing operation.
During the cold drawing operation the wire must be periodically annealed.
The driver for the display device was unable to complete a drawing operation.
See also
This deep drawing operation is preferably carried out in several deep drawing steps.
It is similarly used as an additive for improving the lubrication during the drawing operation.
The pressing or drawing operation thins the sheet metal side wall of the cup.
The composite film is preferably subjected to a biaxial drawing operation in two perpendicular directions.
The drawing operation is carried out after having reheated the bar to the softening point.
The figure shows the tooling before the initial drawing operation has commenced.
Now, drawing operation for the circuit breaker is described.
The steel wires are subjected to a final reduction in diameter during a wet wire drawing operation.
The glass ribbon then undergoes a drawing operation in the zone with these top rolls.
It should be apparent that the metal undergoes rather severe deformation during a deep drawing operation.
This entails interrupting the fiber drawing operation and removing the unusable preform from the top.
Also, undrawn yarns thus obtained were subjected to a drawing operation.
Vacuum Drawing The plug assisted vacuum drawing operation was initiated with initiation of plug extension.
In a preferred form of embodiment, the forming of the sheet is a drawing operation.
In this case, the drawing operation following stretching would be a re - drawing operation.
In addition, the advantage provided by brass during the drawing operation is retained.
The drawing operation may be performed using a bodymaker / press having one or a succession of draw dies.
The method according to the claim 9, wherein the forming step is a drawing operation.
This facilitates the double drawing operation illustrated with respect to FIG . 2B.
This " excess material " is pulled and transferred outwardly during the subsequent drawing operation.
With great benefit the drawing operation will be applied to a reduction of at least 60 %.
However, performing this entire sequence of steps for each drawing operation would be very inefficient.
Thus, a “ warm ” drawing operation is carried out with the following effects,.
Internal supports may comprise a mandrel, a plug, or other support suitable for a tube drawing operation.
Figures 3-8 show in detail the deep drawing operation for the forming of a drawn container preform.
After completion of the expanding operation, and possibly after the relieving operation, a drawing operation FIG.
The major portion of the drawing operation occurs between rolls 10 and 12.
These objects are a necessary part of every Java 2D drawing operation.
Therefore, drawing operation should be controlled preferably within a range from 10 % to 100 % in a residual elongation ratio.
The drawing machine 10 is now ready to start the drawing operation.
The drawing operation described above and illustrated in figures 12a to 12d is known as reverse re-drawing.
The assembly is then placed in tube 49 and the drawing operation is applied.
Figure 3A shows a first deep drawing operation in which the steel plate 10 is formed into a cup 11.
In these documents, the can body is made from a tinplate, by drawing operation.
The unfinished lid 44 resulting from the drawing operation is shown in Fig.
You'll also be interested in:
Examples of using Operation
Show more
We ran a good operation and said nothing
Operation with wire cup brush accessory
It has been in operation for only a few months
Examples of using Drawing
Show more
I have been drawing too much attention to myself
They already found a match on your drawing
Display the drawing and annotation tools
