Examples of 'dried before use' in a sentence
Meaning of "dried before use"
Dried before use: This phrase indicates that something needs to be dried thoroughly before it can be utilized or consumed. It is a precautionary measure to ensure effectiveness or safety
How to use "dried before use" in a sentence
Basic
Advanced
dried before use
The concentrates were dried before use in foaming.
It contains a large amount of water and must be dried before use.
This lining is then dried before use of the distributor.
All solvents are anhydrous or are dried before use.
The filters were air dried before use in probing ( see below ).
The polytetrahydrofuran need not be dried before use.
These leaves must of course be dried before use in preparation of traditional tea.
Make sure the appliance is thoroughly dried before use.
Polymers were dried before use.
The sieve is easily regenerable and does not need to be completely dried before use.
The wet composition is preferably dried before use in formation of unit dosage forms.
Burners which have become wet must be thoroughly dried before use.
The slurry was oven dried before use.
The silica gel bound macrocycle is then washed and dried before use.
The dye is subsequently dried before use.
See also
Cylinders were then rinsed three times with distilled water and dried before use.
Get the appliance completely dried before use.
The completed device should be sterilized using ethanol and dried before use.
All solvents and reagents were dried before use.
The resulting PTA is collected by filtration and must be dried before use.
This mixture is extruded and dried before use.
The dichloromethane was obtained from VWR and distilled and dried before use.
The cages are cleaned and dried before use.
Where a " wet " shaping technique is employed, the shaped units are preferably dried before use.
The TPU pellets were not dried before use.
The key starting material is polyethylene glycol, which is preferably dried before use.
Preferably, the silica is dried before use.
All solvents used are HPLC grade and are dried before use.
After bromide pre-treatment, the supported catalyst is typically dried before use in epoxidation reaction.
If burners get wet, they must be thoroughly dried before use.
If required, the adsorbent may be dried before use.
Finally, the flat membrane is dried before use.
After rinsing, the cleaned substrate is thoroughly dried before use.
If storage was required, the tetrahydrofuran solution was stored and dried before use.
These ingredients are pulverized, pressed into cakes and dried before use as explosives.
Similarly, the TPU material was also dried before use.
For these reasons, PET pellets are thoroughly dried before use.
The absorbent material containing the substrate ( s ) is dried before use.
Typically, after step ( iii ), the fibrous catalyst is dried before use.
You'll also be interested in:
Examples of using Use
Show more
Use this machine with long trousers
Description of method of use with practical example
Do not use the instrument to heat inflammable
Examples of using Dried
Show more
Dried material can be removed with acetone
These toys are dried out of the sun
Dried material lodged in openings of air cap
